http://www.cnccncmachines.com en-us http://www.cnccncmachines.com N/A info@sgdnetworks.com Tue, 07 Feb 2012 22:59:39 -0500 20 http://www.cnccncmachines.com/articles/7822/1/Schott-Systeme-Provides-a-Virtual-CADCAM-Software-Exhibition/Schott-Systeme-Provides-a-Virtual-CADCAM-Software-Exhibition.html Software developer SCHOTT SYSTEME GmbH is helping companies to make informed purchase decisions regarding CAD/CAM software solutions, without the need for critical staff to actually leave the office. info@sgdnetworks.com (Super Admin) Wed, 14 Sep 2011 00:00:00 -0400 http://www.cnccncmachines.com/articles/7785/1/Flexible-CADCAM-Supports-Flexible-Machining/Flexible-CADCAM-Supports-Flexible-Machining.html Bob Bourbon, lead programmer at Planet Tool and Engineering, recalls that the company had to “send some people home” when business slowed about 20 years ago. That incident marked the first and only layoffs at the O’Fallon, Missouri-based shop in the 28 years he has been with the company. Even through recent tough economic times, Planet Tool has managed to stay busy and retain its valuable manufacturing talent. info@sgdnetworks.com (Super Admin) Wed, 20 Jul 2011 00:00:00 -0400 http://www.cnccncmachines.com/articles/7784/1/3D-Systems-NYSE-DDD-acquires-CAD-software-company-Alibre-Inc/3D-Systems-NYSE-DDD-acquires-CAD-software-company-Alibre-Inc.html This acquisition is consistent with 3D Systems’ strategy to democratize access and accelerate adoption of affordable 3D content-to-print solutions that empower professionals and consumers to create and make in 3D. info@sgdnetworks.com (Super Admin) Wed, 20 Jul 2011 00:00:00 -0400 http://www.cnccncmachines.com/articles/7561/1/Moldex-High-performance-Composites-facility-in-India-now-operational/Moldex-High-performance-Composites-facility-in-India-now-operational.html Fresh from the cutting edge of F1 and endurance sports car racing Ian Thomson and Dr Rob Neumann have teamed up with Indian businessman Parag Rajda to offer quality composites products at cost effective pricing from a newly opened purpose built facility in a Special Economic Zone at Sachin, Surat, Gujarat, India. info@sgdnetworks.com (Super Admin) Mon, 06 Dec 2010 00:00:00 -0500 http://www.cnccncmachines.com/articles/7222/1/Major-Chinese-companies-gain-substantial-productivity-improvements-with-WorkNC-CAM-software/Major-Chinese-companies-gain-substantial-productivity-improvements-with-WorkNC-CAM-software.html Sescoi’s expansion in the Chinese market continues apace with the installation of WorkNC CAM software in a number of Chinese toolrooms. Two typical WorkNC users are Changzhou Xingyu Automotive Lighting Systems and Shanghai Sharp Mold and Manufacturing System Co. Ltd. (SSMC). info@sgdnetworks.com (Super Admin) Wed, 28 Apr 2010 00:00:00 -0400 http://www.cnccncmachines.com/articles/7202/1/CAM-Software-Helps-Cut-Machining-Time-50/CAM-Software-Helps-Cut-Machining-Time-50.html Johnson Brass & Machine Foundry in Saukville, WI, uses a patented centrifugal casting technology to convert cast and wrought alloys into "formings." info@sgdnetworks.com (Super Admin) Tue, 20 Apr 2010 00:00:00 -0400 http://www.cnccncmachines.com/articles/7029/1/CAM-Software-Release-for-Jewellery-Designers-Announced-by-MecSoft-Europe/CAM-Software-Release-for-Jewellery-Designers-Announced-by-MecSoft-Europe.html MecSoft Europe has announced the release of MecSoft’s JewelMILL CAM software. JewelMILL provides unprecedented computer aided manufacturing (CAM) power to jewellery designers and goldsmiths, while maintaining an easy-to-use interface. info@sgdnetworks.com (Super Admin) Tue, 23 Feb 2010 00:00:00 -0500 http://www.cnccncmachines.com/articles/6819/1/Striker-updates-sheet-metal-CADCAM-software/Striker-updates-sheet-metal-CADCAM-software.html Striker Systems, which develops sheet-metal manufacturing software, has released Striker 2010 Sheet Metal CAD/CAM and Nesting. info@sgdnetworks.com (Super Admin) Fri, 04 Dec 2009 00:00:00 -0500 http://www.cnccncmachines.com/articles/6609/1/Delft-Spline-Releases-DeskProto-v42-Low-Cost-Editions/Delft-Spline-Releases-DeskProto-v42-Low-Cost-Editions.html Delft Spline Systems has released a new edition of the DeskProto 3D CAM software: DeskProto Version 4.2. This new edition is a re-release of the proven DeskProto V 4.1, a version still used by many happy clients. DeskProto V 4.2 is meant to offer full 3D functionality, including rotary machining, at a lower price. info@sgdnetworks.com (Super Admin) Wed, 02 Sep 2009 00:00:00 -0400 http://www.cnccncmachines.com/articles/6487/1/CAE-software-benefits-Formula-One-performance/CAE-software-benefits-Formula-One-performance.html CD-adapco have been suppliers of advanced CAE software to the Renault F1 Team since its inception in 2001 info@sgdnetworks.com (Super Admin) Wed, 29 Jul 2009 00:00:00 -0400 http://www.cnccncmachines.com/articles/6330/1/CAM-Software-Market-Leaders-Named-by-CIMdata/CAM-Software-Market-Leaders-Named-by-CIMdata.html In the recently-released Version 18 of the NC Software and Related Services Market Assessment Report, consulting and research firm CIMdata, Inc. named the worldwide CAM software market leaders for 2008 and projected those expected to be market leaders in 2009.  info@sgdnetworks.com (Super Admin) Sat, 20 Jun 2009 00:00:00 -0400 http://www.cnccncmachines.com/articles/6135/1/Delcam-to-promote-CAM-software-and-services-at-MetalTech/Delcam-to-promote-CAM-software-and-services-at-MetalTech.html Delcam will be promoting its full range of CAM software and services at the MetalTech exhibition to be held in Kuala Lumpur from 6th to 10th May. The company recently established a new division of its Professional Services Group in nearby Singapore and the Group’s services will be featured for the first time at MetalTech. info@sgdnetworks.com (Super Admin) Wed, 25 Mar 2009 00:00:00 -0400 http://www.cnccncmachines.com/articles/6116/1/DP-Technology-reseller-CIM-Integraters-opens-new-ESPRIT-CAM-Center-office-in-Houston-Texas/DP-Technology-reseller-CIM-Integraters-opens-new-ESPRIT-CAM-Center-office-in-Houston-Texas.html Expanding its geographical service area to better fulfill the needs of existing and future customers, CIM Integraters, an Oklahoma-based reseller for computer-aided-manufacturing (CAM) industry innovator DP Technology, maker of ESPRIT®, has opened a new office in Houston, Texas. info@sgdnetworks.com (Super Admin) Fri, 20 Mar 2009 00:00:00 -0400 http://www.cnccncmachines.com/articles/6110/1/Delcam-software-used-by-Bowes-to-develop-Airbus-cabin-interiors/Delcam-software-used-by-Bowes-to-develop-Airbus-cabin-interiors.html Delcam’s CADCAM software has been used by Bowes Design and Development in most projects it has undertaken for the last 15 years, including two projects within the development of the cabin interiors for the Airbus A380. The first project was to develop a concept interior; the second to manufacture replica cabin linings for climate-control testing. info@sgdnetworks.com (Super Admin) Thu, 19 Mar 2009 00:00:00 -0400 http://www.cnccncmachines.com/articles/6062/1/Cimatron-showcases-latest-CAM-software/Cimatron-showcases-latest-CAM-software.html Cimatron is demonstrating its latest GibbsCAM and CimatronE software for CNC machining centres at the INTEC Trade Fair this week. info@sgdnetworks.com (Super Admin) Wed, 25 Feb 2009 00:00:00 -0500 http://www.cnccncmachines.com/articles/5992/1/Mastercams-Worldwide-Applications-Up-to-136000---CIMdata/Mastercams-Worldwide-Applications-Up-to-136000---CIMdata.html The most recent analysis of CAM software seats produced by CIMdata, Inc. shows that CNC Software’s Mastercam is once again the world’s most widely-used CAM software for the 14th straight year. info@sgdnetworks.com (Super Admin) Wed, 28 Jan 2009 00:00:00 -0500 http://www.cnccncmachines.com/articles/5882/1/Delcam-India-to-celebrate-record-year-with-new-product-launches-at-IMTEX/Delcam-India-to-celebrate-record-year-with-new-product-launches-at-IMTEX.html Delcam India will launch new versions across the complete range of its machining software at the IMTEX exhibition to be held at the Bangalore International Exhibition Centre from 22nd to 28th January. The company will also be celebrating record sales during 2008, which has seen revenue from software sales and maintenance contracts increase by almost 50%. info@sgdnetworks.com (Super Admin) Sat, 20 Dec 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5816/1/A-Better-Alternative-to-Chasing-Variability-with-CAM-Software/A-Better-Alternative-to-Chasing-Variability-with-CAM-Software.html A study performed by IQL (Independent Quality Laboratory, Rockville, RI) shows that the volumetric positioning accuracy of a popular, moderately priced machine tool can be improved by a factor of 2:1 versus the same machine that was purchased and installed to the manufacturer’s standard specifications. This makes it unnecessary to use CAM software to compensate for dimensional variability within the machine’s measuring envelope.  info@sgdnetworks.com (Super Admin) Thu, 04 Dec 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5677/1/Delcam-enhances-FeatureCAM-system/Delcam-enhances-FeatureCAM-system.html FeatureCAM 2009 incorporates enhancements that reflect the increased investment in product development following Delcam's acquisition of the software in 2005. info@sgdnetworks.com (Super Admin) Fri, 31 Oct 2008 00:00:00 -0400 http://www.cnccncmachines.com/articles/5527/1/CAM-software-for-jewellery-showcased/CAM-software-for-jewellery-showcased.html ArtCAM JewelSmith claimed to be the main design and manufacturing software for the jewellery industry info@sgdnetworks.com (Super Admin) Sat, 04 Oct 2008 00:00:00 -0400 http://www.cnccncmachines.com/articles/5280/1/DP-Technology-debuts-ESPRIT-2009-CAM-software-at-IMTS-2008/DP-Technology-debuts-ESPRIT-2009-CAM-software-at-IMTS-2008.html Computer-aided manufacturing (CAM) industry leader DP Technology debuts the latest release of its flagship product, info@sgdnetworks.com (Super Admin) Tue, 26 Aug 2008 00:00:00 -0400 http://www.cnccncmachines.com/articles/5184/1/CAM-software-aids-5-axis-aerospace-machining/CAM-software-aids-5-axis-aerospace-machining.html US mould and die maker has moved into contract machining, especially aerospace parts, and the 5-axis machines and PowerMILL software are used extensively for this work. info@sgdnetworks.com (Super Admin) Wed, 13 Aug 2008 00:00:00 -0400 http://www.cnccncmachines.com/articles/5042/1/CAM-Software-Is-Productive/CAM-Software-Is-Productive.html  PartMaker CAD/CAM software is designed to program CNC mills, lathes, turn-mill centers and CNC Swiss-type lathes. Version 4.0 features a user interface for Windows 95, 98, 2000 and NT, as well as enhanced drafting and machining functionality and Internet-linked context sensitive help. info@sgdnetworks.com (Super Admin) Thu, 24 Jul 2008 00:00:00 -0400 http://www.cnccncmachines.com/articles/4902/1/DP-Tech-Debuts-ESPRIT-2009-Mold-v10-at-ESPRIT-2008/DP-Tech-Debuts-ESPRIT-2009-Mold-v10-at-ESPRIT-2008.html ESPRIT 2009 and ESPRIT Mold Version 10, the latest versions of computer-aided-manufacturing (CAM) software produced by CAM industry leader DP Technology, were introduced at  ESPRIT World Conference 2008, which took place this spring in Denver, CO. info@sgdnetworks.com (Super Admin) Tue, 08 Jul 2008 00:00:00 -0400 http://www.cnccncmachines.com/articles/4571/1/The-True-Story-of-Boris/The-True-Story-of-Boris.html Boris, Delcam’s spider logo, is not just a marketing or branding gimmick. info@sgdnetworks.com (Super Admin) Sat, 24 May 2008 00:00:00 -0400 http://www.cnccncmachines.com/articles/4309/1/The-Players-in-CAM-software-development/The-Players-in-CAM-software-development.html Computer Aided Manufacturing (CAM) software offers machine shop operators a fast return-on-investment productivity improvement solution, but finding the CAM package that offers a shop the most potential benefit is anything but easy. info@sgdnetworks.com (Super Admin) Sat, 19 Apr 2008 00:00:00 -0400 http://www.cnccncmachines.com/articles/4108/1/Sescoi-Celebrates-20-Years-of-Successful-CAM-Software/Sescoi-Celebrates-20-Years-of-Successful-CAM-Software.html In the late eighties, CNC programming of complex components was a difficult and lengthy process. This was when Bruno Marko, CEO and Gérard Billard, R&D Innovation Manager, the driving forces behind Sescoi, pioneered the development of a new, reliable and automatic 3-axis CAM system, which led to the launch of WorkNC in 1988. info@sgdnetworks.com (Super Admin) Fri, 28 Mar 2008 00:00:00 -0400 http://www.cnccncmachines.com/articles/3866/1/Choosing-the-Right-CAM-Software/Choosing-the-Right-CAM-Software.html As the demand for more sophisticated and efficient machining increases, so does the need for more sophisticated computer aided manufacturing/machining (CAM) software. info@sgdnetworks.com (Super Admin) Fri, 22 Feb 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/3710/1/CIMdata-Ranks-CNC-Mastercam-1-CAM-Software-for-13th-Year/CIMdata-Ranks-CNC-Mastercam-1-CAM-Software-for-13th-Year.html The most recent analysis of CAM software seats produced by CIMdata, Inc., shows that CNC Software’s Mastercam is once again the world’s most widely-used CAM software for the 13th straight year.  info@sgdnetworks.com (Super Admin) Sat, 02 Feb 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/2626/1/CAM-software-lends-arm-support/CAM-software-lends-arm-support.html As the result of a collaboration between Surfware and Faro Technologies, SurfCAM now supports USB FaroArm products. The alliance provides seamless part digitizing to machining and a direct interface from Faro portable measurement arms to the CAM software. info@sgdnetworks.com (Super Admin) Thu, 29 Nov 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/717/1/CAM-Software-Speeds-Formula-One-Racers/CAM-Software-Speeds-Formula-One-Racers.html If a precision chassis part isn't made correctly for a Formula One race car, the vehicle could be "stuffed right into a wall," says Phil Kightley, co-founder and managing director of Taylor-Kightley Engineering (Northampton, England, UK). info@sgdnetworks.com (Super Admin) Wed, 28 Feb 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/419/1/Modelling-advances-maintain-CAM-softwares-edge/Modelling-advances-maintain-CAM-softwares-edge.html A and M EDM, based in Smethwick, West Midlands, offers subcontract wire and spark erosion services. Founded in 2002 and starting with two Sodick Wire EDM machines, the company has expanded this to nine, with three Hurco milling machines info@sgdnetworks.com (Super Admin) Tue, 13 Feb 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/643/1/CAM-Milling-Software---computer-aided-manufacturing-ACUCARV-Advanced-Mill-version-115F/CAM-Milling-Software---computer-aided-manufacturing-ACUCARV-Advanced-Mill-version-115F.html  The company announces the latest release of ACU*CARV Advanced Mill CAM milling software. ACU*CARV Advanced Mill version 11.5F includes an NC verification module with animated tool and stock removal. info@sgdnetworks.com (Super Admin) Sun, 26 Aug 2001 00:00:00 -0400 http://www.cnccncmachines.com/articles/656/1/New-CAM-technology-links-knowledge-and-solid-modeling---computer-aided-manufacturing---Scanning-The-Horizon/New-CAM-technology-links-knowledge-and-solid-modeling---computer-aided-manufacturing---Scanning-The.html Solid modeling technology has made big inroads into the CAD world over the last decade for several reasons. Solid modeling has been of limited use on the CAM side of the equation, however, because it didn't bring all that much to the table for someone who mostly just wants to create tool paths. info@sgdnetworks.com (Super Admin) Sun, 26 Oct 1997 00:00:00 -0400 http://www.cnccncmachines.com/articles/655/1/CADCAM-wars---new-computer-aided-design-computer-aided-manufacturing-software-from-Structural-Dynamics-Research-Corp/CADCAM-wars---new-computer-aided-design-computer-aided-manufacturing-software-from-Structural-Dyna.html  Like big OEMs in several other industries, General Motors Corp., Ford Motor Co. and Chrysler Corp. each has decided to standardize its computer engineering functions on one basic system and supplier: GM uses EDS Unigraphics, Chrysler uses Dassault Systemes' CATIA and Ford has settled on Structural Dynamics Research Corp.'s I-DEAS Master Series. info@sgdnetworks.com (Super Admin) Thu, 26 Jun 1997 00:00:00 -0400 http://www.cnccncmachines.com/articles/706/1/NIST-revises-ATP-electronics-manufacturing-competition---the-National-Institute-of-Standards-and-Technologys-Advanced-Technology-Program-for-Computer-Integrated-Manufacturing-for-Electronics/NIST-revises-ATP-electronics-manufacturing-competition---the-National-Institute-of-Standards-and-Tec.html GAITHERSBURG, MD.--The National Institute of Standards and Technology (NIST) through its Advanced Technology Program (ATP) has revised and extended its ATP "focused program" competition in Computer-Integrated Manufacturing for Electronics for the 1995 competition being held this summer.  info@sgdnetworks.com (Super Admin) Mon, 10 Jul 1995 00:00:00 -0400