http://www.cnccncmachines.com en-us http://www.cnccncmachines.com N/A info@seoseonews.com Mon, 05 Jan 2009 20:27:49 -0600 20 http://www.cnccncmachines.com/articles/5912/1/Economical-VMC/Economical-VMC.html Compared with previous models, the VC Nexus 410A VMC's electric-power consumption during standby is 20% less, its air consumption 32% less info@seoseonews.com (Super Admin) Tue, 30 Dec 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/5891/1/Machining-Center-offers-rapid-traverse-rates-up-to-40-mmin/Machining-Center-offers-rapid-traverse-rates-up-to-40-mmin.html Designed to handle workpieces with edge lengths up to 3,000 mm, HEC 1600 Athletic features 53 kW spindle power and spindle speed up to 7,500 rpm with X,Y,Z axis travels of 2,800 x 2,000 x 2,100 mm and interference range up to 3,000 mm.  info@seoseonews.com (Super Admin) Tue, 23 Dec 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/5890/1/IMTS-is-Global-Premiere-of-New-SPC-7120-HMC-from-SIP/IMTS-is-Global-Premiere-of-New-SPC-7120-HMC-from-SIP.html The SPC (Super Precision Center) 7120 SIP horizontal machining center (HMC) features a compact design, highly productive tool and workpiece handling and is ideally suited for a broad spectrum of production applications - while routinely info@seoseonews.com (Super Admin) Tue, 23 Dec 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/5875/1/Toyodas-Double-Column-Vertical-Machining-Centers-Meet-Needs-of-Heavy-Part-Manufacturers/Toyodas-Double-Column-Vertical-Machining-Centers-Meet-Needs-of-Heavy-Part-Manufacturers.html Toyoda Machinery's bridge type machining centers deliver rugged reliability and high-accuracy output. This provides heavy cutting capabilities for large, heavy part manufacturers in industries such as aerospace and energy. info@seoseonews.com (Super Admin) Fri, 19 Dec 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/5852/1/Machining-Center-Heads-for-Flexible-Production/Machining-Center-Heads-for-Flexible-Production.html Shops that work with large or difficult-to-handle parts benefit when being able to perform 5-sided machining in single setups in job volumes that range from prototype to production levels on one machine. info@seoseonews.com (Super Admin) Fri, 12 Dec 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/5751/1/Vertical-Machining-Centers-suit-large-part-industries/Vertical-Machining-Centers-suit-large-part-industries.html Optimized for rotational accuracy and thermal stability, FV1480 and FV1680 respectively feature 61 x 31.5 in. and 68.9 x 31.5 in. tables with 3,960 and 4,400 lb max loads.  info@seoseonews.com (Super Admin) Thu, 20 Nov 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/5737/1/Parkinson-Technologies-ramps-up-for-2009/Parkinson-Technologies-ramps-up-for-2009.html  Parkinson Technologies has experienced record growth in 2008, seeing increased sales of over 30% from 2007. To keep up with the increased demand for the company’s products which include Marshall and Williams plastics processing systems, Parkinson Winders and Key Filters melt filtration equipment, Parkinson has added numerous employees (the company’s workforce was expanded by 15%) and restructured its Operations organization.  info@seoseonews.com (Super Admin) Mon, 17 Nov 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/5723/1/Slowdown-in-textile-machinery-offtake-feared/-Slowdown-in-textile-machinery-offtake-feared.html A RAW DEAL: A CNC universal machining centre at the textile machinery manufacturing unit of Lakshmi Machine Works near Coimbatore. info@seoseonews.com (Super Admin) Wed, 12 Nov 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/5717/1/Coolant-unions-for-machining-centers/Coolant-unions-for-machining-centers.html DEUBLIN Company has announced SpindleShield technology for use with CNC machines. info@seoseonews.com (Super Admin) Mon, 10 Nov 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/5798/1/Workholding-systems-for-CNC-machining-centers/Workholding-systems-for-CNC-machining-centers.html  The company, which develops and manufactures workholding systems for CNC machining Centers will be demonstrating its workholding systems. info@seoseonews.com (Super Admin) Sat, 01 Nov 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5613/1/Revolutionary-Cublex-Technology-Is-Now-Available-In-Two-New-Machining-Centers/Revolutionary-Cublex-Technology-Is-Now-Available-In-Two-New-Machining-Centers.html Matsuura's unique CUBLEX multi-process technology provides multiple 5-Axis milling, turning, and grinding capabilities, all in one high performance platform. info@seoseonews.com (Super Admin) Wed, 22 Oct 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5570/1/Leader-CNC-announces-Open-House/Leader-CNC-announces-Open-House.html From 18 to 20 November 2008, Leader CNC will be demonstrating the capabilities of its DMC/DMS range of turning centres and Kitamura machining centres. info@seoseonews.com (Super Admin) Tue, 14 Oct 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5523/1/Powerful-horizontal-machining-centre-has-speed/Powerful-horizontal-machining-centre-has-speed.html A high performance horizontal machining centre provides power and cutting capability of heavier duty machines with the performance of high speed machines. info@seoseonews.com (Super Admin) Sat, 04 Oct 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5522/1/HMC-builder-provides-technical-support/HMC-builder-provides-technical-support.html When a foundry, more used to batch machining, took on volume production of transmission parts, it sought a machine tool supplier, which could provide technical and fixtures back-up. info@seoseonews.com (Super Admin) Sat, 04 Oct 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5520/1/Machining-centres-pallets-loaded-by-robot/Machining-centres-pallets-loaded-by-robot.html In a system to automatically load/unload machining centres, a robot selects the pallet size to suit the job, so reducing the amount of space required for pallets in unmanned machining systems. info@seoseonews.com (Super Admin) Sat, 04 Oct 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5516/1/Precision-machining-firm-adds-on-machining-centre/Precision-machining-firm-adds-on-machining-centre.html Soaring orders for a UK precision machining subcontractor has led to the purchase of a Hardinge Bridgeport 1500XP3HP machining centre, which has 4th axis and probing capability. info@seoseonews.com (Super Admin) Fri, 03 Oct 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5514/1/Machining-centres-speed-subcontract-throughput/Machining-centres-speed-subcontract-throughput.html A 5-axis machining centre installed at a subcontract machine shop reduced cycle times 25-30%, encouraging the company to oder more machining centres from the same supplier. info@seoseonews.com (Super Admin) Fri, 03 Oct 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5513/1/Thame-installs-second-horizontal-machining-centre/Thame-installs-second-horizontal-machining-centre.html Thame Workholding's remit extends from design through to the manufacture, assembly, supply and maintenance of virtually every type of workholding device or system. info@seoseonews.com (Super Admin) Fri, 03 Oct 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5463/1/Machining-Center-performs-sub-micron-accuracy-milling/Machining-Center-performs-sub-micron-accuracy-milling.html Featuring linear motor drives and hydrostatic guide ways for all axes, YMC325 Micro Center operates with optimal stiffness and straightness.  info@seoseonews.com (Super Admin) Thu, 25 Sep 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5461/1/Flexible-Horizontal-Machining-Center/Flexible-Horizontal-Machining-Center.html Combine a maximum cutting feed rate for all axes of 1,418 ipm, 0.5 G acceleration and a 12,000-rpm, 30-hp spindle, and get a horizontal machining center designed for general purpose cutting applications. info@seoseonews.com (Super Admin) Thu, 25 Sep 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5447/1/Deublin-57-series-of-rotating-unions-available-from-Norman-G-Clark/Deublin-57-series-of-rotating-unions-available-from-Norman-G-Clark.html The rotating unions are used in many manufacturing processes to cool, heat or transfer fluid (pneumatic or hydraulic) power. info@seoseonews.com (Super Admin) Wed, 24 Sep 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5430/1/Adaptable-machining-centers/Adaptable-machining-centers.html The SpeedMat table-type machining center line includes four models with X-axis strokes from 2,000 to 4,000 mm, Y axes from 1,600 to 3,000 mm, and Z axes from 1,600 to 2,200 mm. info@seoseonews.com (Super Admin) Thu, 18 Sep 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5497/1/Mill-turn-centre-machines-bike-parts-in-one-hit/Mill-turn-centre-machines-bike-parts-in-one-hit.html Mill-turn centre cuts out the handling operations so that a mountain bike parts manufacturer can operate more machines with the same number of people, while reducing costs and improving quality. info@seoseonews.com (Super Admin) Mon, 01 Sep 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5312/1/CNC-processing-center/CNC-processing-center.html The Homag BOF-712 fixed-gantry processing center from Stiles Machinery features advanced CNC routing technology, single or dual work zones and IPO logic.  info@seoseonews.com (Super Admin) Mon, 01 Sep 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5277/1/New-VMC-Offers-Heavyweight-Performance-at-Lightweight-Price/New-VMC-Offers-Heavyweight-Performance-at-Lightweight-Price.html The new heavy-duty FANUC RoboDrill eco(TM) vertical machining center from Methods Machine Tools offers high-speed milling, drilling, tapping, deburring, and chamfering. Named for its economical price and its ecological spindle that returns energy to the machine in the intervals between cutting, the RoboDrill eco is designed and built in Japan for years of continuous duty. info@seoseonews.com (Super Admin) Tue, 26 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5238/1/DEUBLIN-SpindleShield-Unions-For-CNC-Machining-Centers/DEUBLIN-SpindleShield-Unions-For-CNC-Machining-Centers.html DEUBLIN Company announces SpindleShield technology for use with the most sophisticated CNC machines. DEUBLIN coolant unions with SpindleShield employ a unique patent-pending electronic leak detection system that detects coolant problems and allows for rapid machine shutdown. info@seoseonews.com (Super Admin) Thu, 21 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5182/1/High-speed-machining-center/High-speed-machining-center.html The new design of the HSM 400U five-axis high-speed machining center's rotational axes reportedly allows speeds up to 25 faster than conventional rotary tables. info@seoseonews.com (Super Admin) Wed, 13 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5171/1/Vertical-machining-centre-has-acceleration-of-2G/Vertical-machining-centre-has-acceleration-of-2G.html The new C Dugard agency for Akira-Seiki vertical machining centres will include one of the fastest rapid traverse rates of 96 m/min available on a vertical machining centre with an acceleration of 2G. info@seoseonews.com (Super Admin) Tue, 12 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5136/1/Niigata-Hn80d-Horizontal-Machining-Centers-From-SNK-America-Are-Built-To-Efficiently-Machine-Medium-To-Large-Sized-Parts--IMTS-2008---Booth-A-8432/Niigata-Hn80d-Horizontal-Machining-Centers-From-SNK-America-Are-Built-To-Efficiently-Machine-Medium-.html The high-powered, ruggedly built Niigata HN80D Horizontal Machining Center from SNK America, Inc. efficiently and reliably machines medium to large parts in a wide range of materials. info@seoseonews.com (Super Admin) Tue, 05 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5126/1/CNC-Machining-Center-With-Choice-Of-Spindles/CNC-Machining-Center-With-Choice-Of-Spindles.html The Producer high speed, CNC machining center is designed for production milling, grinding, engraving, drilling, routing and profiling. It is offered with 1, 2 or 3 high speed, liquid cooled, electric spindles, with programmable spindle speeds up to 45,000 rpm. info@seoseonews.com (Super Admin) Mon, 04 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5057/1/Learning-centre-majors-on-automation-technology/Learning-centre-majors-on-automation-technology.html FANUC Robotics UK is supporting Perkins with its Learning Centre by donating a M-710i robot to familiarise students with programming techniques and preventative maintenance. info@seoseonews.com (Super Admin) Sat, 26 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4964/1/Airbus-Awards-Multi-Million-Dollar-Contract-to-Flow-International-Corporation/Airbus-Awards-Multi-Million-Dollar-Contract-to-Flow-International-Corporation.html Flow International Corporation (NASDAQ: FLOW), the world's leading developer and manufacturer of industrial waterjet machines for cutting and cleaning applications, today announced that Airbus has awarded Flow all of its multi-million dollar contract to manufacture and install multiple Composite Machining Center (CMC) abrasive waterjet and routing machine tool systems. info@seoseonews.com (Super Admin) Wed, 16 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4951/1/Veertical-amchining-centre-reduces-machining-times/Veertical-amchining-centre-reduces-machining-times.html Broadbent Stanley has introduced a range of competitively proced vertical machining centres and a specialist pump maker reported savings in job set up and machining times. info@seoseonews.com (Super Admin) Mon, 14 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4918/1/Enshu-to-Feature-High-Speed-Horizontal-Machining-Center-with-300-Tool-ATC-and-18-Pallet-FMS-at-IMTS-2008/Enshu-to-Feature-High-Speed-Horizontal-Machining-Center-with-300-Tool-ATC-and-18-Pallet-FMS-at-IMTS.html At IMTS 2008, Enshu will be featuring their high-speed JE80S horizontal machining center with a 300-tool matrix-style tool magazine and 18-pallet Flexible Manufacturing System (FMS). info@seoseonews.com (Super Admin) Thu, 10 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4892/1/Vertical-machining-centres-aid-subcontractor/Vertical-machining-centres-aid-subcontractor.html Recent purchases by Verulam Engineering have included a Dugard Eagle 10 lathe, a Dugard Eagle 1000 VMC with Heidenhain iTNC 530 control and fourth axis and a Dugard Eagle 450 XP VMC. info@seoseonews.com (Super Admin) Sat, 05 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4807/1/Trunnions-for-vertical-machining-centers/Trunnions-for-vertical-machining-centers.html Horizontal index trunnions from Royal Machine and Tool Co., Berlin, Conn.,  provide access to three sides of workpieces.  info@seoseonews.com (Super Admin) Thu, 26 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4795/1/Horizontal-machining-centre-is-powerful-agile/Horizontal-machining-centre-is-powerful-agile.html MAG Giddings and Lewis' HMC 1250 horizontal machining centre has main spindle up to 80kW and a highly rigid contouring table with a 2.4m swing for heavy cutting. info@seoseonews.com (Super Admin) Wed, 25 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4775/1/Vertical-turning-centre-machines-in-one-set-up/Vertical-turning-centre-machines-in-one-set-up.html A vertical turning centre equipped with a selection of modular live spindle machining heads, tool magazines and a wide choice of machine sizes, machines in one set-up. info@seoseonews.com (Super Admin) Tue, 24 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4750/1/Horizontal-Machining-Centers/Horizontal-Machining-Centers.html Cross Huller Ex-Cell-O Lamb has introduced several new horizontal machining centers. info@seoseonews.com (Super Admin) Fri, 20 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4749/1/High-Speed-Vertical-Machining-Center-For-Large-Mold-Manufacturing/High-Speed-Vertical-Machining-Center-For-Large-Mold-Manufacturing.html Makino has introduced the V99 and V99L vertical machining centers engineered to provide accuracy and high-speed performance in large die/mold milling while helping to reduce benchwork and post-production polishing. info@seoseonews.com (Super Admin) Fri, 20 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4735/1/Datron-Dynamics-Introduces-The-Excelsior-Lite-A-CNC-Machining-Center/Datron-Dynamics-Introduces-The-Excelsior-Lite-A-CNC-Machining-Center.html Datron's excelsior® Lite was designed specifically for manufacturers who need their innovative high-speed technology but, for budget reasons, are unable to afford a machining center made exclusively for small tooling - 1/4 inch and under. info@seoseonews.com (Super Admin) Thu, 19 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4730/1/Multiple-workholders-fit-VMC/Multiple-workholders-fit-VMC.html Providing 43 X 22 X 22-in. travels (X/Y/Z), the A-3 VMC handles large workpieces as well as multiple workholders containing small parts. info@seoseonews.com (Super Admin) Wed, 18 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4692/1/New-Machining-Center-Offers-5-Sided-Processing-Includes-Turning/New-Machining-Center-Offers-5-Sided-Processing-Includes-Turning.html Bohle Machine Tools, Plymouth, Michigan, is introducing to North America the SHW UniSpeed 5 travelling column machining center at IMTS 2008, Booth A-8462. Very fast and very capable, the UniSpeed can complete many parts in a single setup with 5-sided machining. info@seoseonews.com (Super Admin) Sat, 14 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4674/1/New-Toyoda-VMCs-Offer-Superior-Performance-in-Heavy-Duty-and-High-Speed-Machining/New-Toyoda-VMCs-Offer-Superior-Performance-in-Heavy-Duty-and-High-Speed-Machining.html Arlington Heights, IL - Toyoda Machinery announces the technology upgrade to its line of vertical machining centers. Toyoda successfully launched its VMC line into the market in 2006. Hundreds of machines have been sold since the initial product launch. info@seoseonews.com (Super Admin) Fri, 13 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4657/1/Vertical-Machining-Centers-handle-large-components/Vertical-Machining-Centers-handle-large-components.html Equipped with 34.8 hp spindle offering speeds to 10,000 rpm and 110 lb-ft torque, Model GX 1300 provides XYZ travels of 51.18 x 27.55 x 25.00 in., while Model GX 1600 delivers 62.99 x 27.55 x 25.00 in. travels.  info@seoseonews.com (Super Admin) Wed, 11 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4646/1/High-speed-horizontal-machining-centre-arrives/High-speed-horizontal-machining-centre-arrives.html At IMTS, MAG Hueller Hille will demonstrate a high speed, horizontal machining centre with axis travels of 90m/min and a B-axis speed of 80 rev/min. info@seoseonews.com (Super Admin) Tue, 10 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4627/1/New-Vertical-CNC-Honing-System-Designed-for-Multi-Spindle-Sizing-and-Finishing-of-Deep-Bores-up-to-200mm-Dia-Parts-up-to-710mm-Long/New-Vertical-CNC-Honing-System-Designed-for-Multi-Spindle-Sizing-and-Finishing-of-Deep-Bores-up-to-2.html Engineered for robotic part loading of landing gear components, bearing sleeves, cylinder liners, motorcycle/ATV engines, multi-bore gas/diesel blocks, or 2-cycle power equipment engines. Servo X-axis allows automated step-and-repeat work. info@seoseonews.com (Super Admin) Sat, 31 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4614/1/Vertical-machining-centre-mills-at-40000-revmin/Vertical-machining-centre-mills-at-40000-revmin.html Datron is to introduce a 40,000 rev/min vertical machining centre with small tools for machining in non-ferrous materials, such as aluminum and plastics. info@seoseonews.com (Super Admin) Fri, 30 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4592/1/Machining-Center-handles-multiple-angles-and-3D-contours/Machining-Center-handles-multiple-angles-and-3D-contours.html Featuring cast iron, cast steel, and steel weldment construction for rigid and precise operation, RB-200F Series 5-Axis Bridge Type Machining Center performs multi-angle machining and simultaneous multi-axis contouring. info@seoseonews.com (Super Admin) Wed, 28 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4586/1/Vertical-machining-centre-mills-moulds-dies/Vertical-machining-centre-mills-moulds-dies.html An advanced vertical machining centre is designed to raise accuracy when milling moulds and dies by using digital control with integral CAD/CAM software package. info@seoseonews.com (Super Admin) Tue, 27 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4495/1/Vertical-machining-centre-finish-suits-press-tools/Vertical-machining-centre-finish-suits-press-tools.html Portuguese press tool manufacturer reports that components produced by a vertical machining centre can be used from the machine tool, without having to apply extra finishing processes. info@seoseonews.com (Super Admin) Thu, 15 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4471/1/Compact-HMCs-offer-fast-pallet-changing/Compact-HMCs-offer-fast-pallet-changing.html Compact HMCs offer fast pallet changingCompact horizontal machining centres comprise a fast 180 deg hydraulic pallet changer with a high load capacity for safe and accurate pallet positioning. info@seoseonews.com (Super Admin) Mon, 12 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4469/1/Vertical-machining-centre-cuts-tough-alloys/Vertical-machining-centre-cuts-tough-alloys.html Rugged vertical machining centre with an 18kW high-torque spindle and through-tool coolant delivery enables a UK subcontractor to efficiently cut SS and Duplex, as well as other tough alloys. info@seoseonews.com (Super Admin) Mon, 12 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4435/1/Compact-vertical-machining-centre-is-versatile/Compact-vertical-machining-centre-is-versatile.html XYZ Machine Tools has developed a compact vertical machining centre to machine the widest possible variety of components within the smallest possible machine occupied area. info@seoseonews.com (Super Admin) Tue, 06 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4428/1/Rotary-table-option-for-maching-centers/Rotary-table-option-for-maching-centers.html Makino's 1-Series a51, a61 and a71 horizontal machining centers are now offered with a 5-axis rotary table (5XR) option for manufacturing applications that require maximum throughput and reliability. info@seoseonews.com (Super Admin) Mon, 05 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4394/1/Horizontal-machining-centres-are-customisable/Horizontal-machining-centres-are-customisable.html Heller's H series of horizontal machining centres are highly modifiable, robust and accurate machines designed to provide the user with the ideal machine capability from a standard range. info@seoseonews.com (Super Admin) Thu, 01 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4380/1/5-axis-vertical-machining-centre-has-large-Z-axis/5-axis-vertical-machining-centre-has-large-Z-axis.html Five-axis vertical machining centre from YMT technologies has an extended Z-axis and a swarf system that ensures removal of swarf without manual intervention. info@seoseonews.com (Super Admin) Tue, 29 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4368/1/Vertical-machining-centre-is-more-precise/Vertical-machining-centre-is-more-precise.html For precise machining of larger components, YMT Technologies has introduced a powerful vertical machining centre, which has its spindle within a symmetrical headstock that avoids thermal deformation. info@seoseonews.com (Super Admin) Mon, 28 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4281/1/Horizontal-machining-centre-is-highly-rigid/Horizontal-machining-centre.html MAG Huller Hille's extremely rigid NBH 5+ horizontal machining centre is constructed from a heavily ribbed, one piece casting with high clamping characteristics info@seoseonews.com (Super Admin) Thu, 17 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4273/1/Vertical-machining-centre-is-flexible-heavy-duty/Vertical-machining-centre-is-flexible-heavy-duty.html A vertical machining centre from C Dugard is competitively priced for subcontract companies seeking a flexible, general good capacity machining centre carrying out heavy duty metal cutting info@seoseonews.com (Super Admin) Wed, 16 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4258/1/Rotary-table-slashes-part-production-time/Rotary-table-slashes-part-production-time.html An increased production of combustion turbines for power generation has spurred a corresponding increase in demand for fuel nozzles, which control the flow of fuel into the combustion chamber.  info@seoseonews.com (Super Admin) Mon, 14 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4226/1/Horizontal-Machining-Centers/Horizontal-Machining-Centers.html Cross Huller Ex-Cell-O Lamb has introduced several new horizontal machining centers.The new XHC 241 high-speed, linear motor equipped horizontal machining center offers linear axis accelerations of 13, 11, and 14 m/sec2 (42.6509, 36.0892 and 45.9316 ft./sec2) for the X, Y, and Z-axes respectively and feedrates up to 120 m/min (393.6999 ft./min). info@seoseonews.com (Super Admin) Thu, 10 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4215/1/Cut-threads-verified-in-machining-centres/Cut-threads-verified-in-machining-centres.html A thread verification unit carried in a machining centre's automatic tool changer magazine and is picked up and used automatically to check internal and external threads info@seoseonews.com (Super Admin) Wed, 09 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4202/1/Precise-vertical-machining-centres-introduced/Precise-vertical-machining-centres-introduced.html Precise vertical machining centres with linear motor powered axis drives offer excellent productivity, precision, contour precision and workpiece surface quality info@seoseonews.com (Super Admin) Tue, 08 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4163/1/VMC-offers-advanced-high-performance-machining/VMC-offers-advanced-high-performance-machining.html Described as being 'ultra fast, a vertical machining centre offers an optimal balance between high speed machining performance, rigidity and accuracy info@seoseonews.com (Super Admin) Thu, 03 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4109/1/Vertical-horizontal-borers-and-project-management-services-from-Artec-Engineering/Vertical-horizontal-borers-and-project-management-services-from-Artec-Engineering.html Artec Engineering is a well established engineering company that provides cost effective engineering solutions to the South Australian market. Artec Engineering’s Lonsdale facility in South of Adelaide and provides a wide range of quality products and services to various clients in South Australia. info@seoseonews.com (Super Admin) Fri, 28 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4081/1/Westec-2008/Westec-2008.html Bridgeport, a member of the Hardinge Group (www.hardinge.com), will demonstrate the latest addition to its GX-Series of vertical machining centers.  info@seoseonews.com (Super Admin) Wed, 26 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4073/1/Vertical-machining-centre-reduces-lead-times/Vertical-machining-centre-reduces-lead-times.html Vertical machining centre reduceMedical implants and instrumentation manufacturer has introduced 'lean' cell-structured machining systems - including high speed machining - to reduce overall manufacturing lead times info@seoseonews.com (Super Admin) Tue, 25 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4017/1/Fast-5-axis-VMC-has-high-volumetric-accuracy/Fast-5-axis-VMC-has-high-volumetric-accuracy.html A fast, 5-axis vertical machining centre has a casting design which provides an ultra rigid machine structure and a a novel gear drive system for the A and C rotary axes info@seoseonews.com (Super Admin) Mon, 17 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4015/1/Horizontal-machining-centre-reduces-set-ups/Horizontal-machining-centre-reduces-set-ups.html A twin-pallet, 5-axis, horizontal machining centre is producing false rear spar trailing edges for the Airbus A380 in faster cutting cycles than was possible on the machines previously used info@seoseonews.com (Super Admin) Mon, 17 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/3992/1/Twin-pallet-machining-centre-is-under-GBP-100000/Twin-pallet-machining-centre-is-under-GBP-100000.html For under GBP 100,000, a UK machine tool supplier is offering a twin-pallet, moving column machining centre, with a 40-tool automatic tool changer and Fanuc CNC info@seoseonews.com (Super Admin) Thu, 13 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/3971/1/VMC-uses-the-power-of-the-Anilam-6000i-CNC-system/VMC-uses-the-power-of-the-Anilam-6000i-CNC-system.html The Anilam multi-axis 6000i Series CNC highlights the unbeatable cost-to-performance ratio in machine control that is increasingly gaining approval by OEMs and importers of vertical machining centres info@seoseonews.com (Super Admin) Tue, 11 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/3970/1/Machining-and-sourcing-keeps-products-competitive/Machining-and-sourcing-keeps-products-competitive.html Mini Gears offers precision engineering and machining expertise, but has now added a global sourcing capability for material and components, to maintain competitive costs: see them at Subcon in April info@seoseonews.com (Super Admin) Tue, 11 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/3969/1/Mazaks-New-HCN-8800-II-Raises-the-Bar-for-Horizontal-Machining/Mazaks-New-HCN-8800-II-Raises-the-Bar-for-Horizontal-Machining.html Mazak's Nexus product family has expanded with the introduction of the HORIZONTAL CENTER NEXUS 8800-II. This new Horizontal Machining Center meets the needs of high productivity for large parts production with a much larger platform and twice the levels of accuracy than ISO requires. info@seoseonews.com (Super Admin) Tue, 11 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/3953/1/Vertical-machining-centre-is-for-heavy-duty/Vertical-machining-centre-is-for-heavy-duty.html An open fronted, heavy duty, 15kW vertical machining centre has CNC with a series of easy-to-use cycles designed to simplify and speed up programming times info@seoseonews.com (Super Admin) Wed, 05 Mar 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3911/1/Vertical-machining-centres-make-hydroforming-tools/Vertical-machining-centres-make-hydroforming-tools.html A Swedish hydroforming company has invested in an advanced CNC machining centre to make as much of its tooling 'in-house' and provide customers with a fast service info@seoseonews.com (Super Admin) Thu, 28 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3910/1/New-Modular-Honing-Machine-Series-Scaleable-from-Basic-to-The-Works-as-Automated-Multi-Spindle-System-with-Robotic-Part-Handling-GagingSPC-and-Tooling-Flexibility.html Capable of sizing and finishing bores to submicron accuracy, uniquely versatile conventional honing machine can do single-pass work, too - in mid to high production volumes info@seoseonews.com (Super Admin) Thu, 28 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3907/1/Mould-and-tool-maker-invests-in-probing-and-VMC/Mould-and-tool-maker-invests-in-probing-and-VMC.html A five-man tool making firm recently described how it is keeping abreast of technology and coping with overseas competition, writes Mike Page info@seoseonews.com (Super Admin) Thu, 28 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3860/1/Vertical-machining-centre-has-spindle-chiller/Vertical-machining-centre-has-spindle-chiller.html A GBP 40,000, 9kW spindle, vertical machining centre is equipped with a spindle chiller as standard, which allows the homogenous absorption of thermal expansion info@seoseonews.com (Super Admin) Fri, 22 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3856/1/CNC-micro-machining-centre-cuts-delicate-work/CNC-micro-machining-centre-cuts-delicate-work.html A CNC 5-axis micro-machining centre carries out super precision and delicate machining to 1 micron accuracy using a 40,000 rev/min spindle and highly accurate feed motors info@seoseonews.com (Super Admin) Wed, 20 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3842/1/Horizontal-machining-centres-mill-titanium/Horizontal-machining-centres-mill-titanium.html A range of 4- and 5-axis horizontal machining centres are designed for highest volumetric accuracy and stiffness for machining precision components in titanium and nickel alloys info@seoseonews.com (Super Admin) Tue, 19 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3751/1/Sawing-On-A-Machining-Center/Sawing-On-A-Machining-Center.html One of the unusual operations that the PBZ NT five-axis machining center can perform is sawing with a blade as much as 20 inches in diameter. This machine is marketed in the United States by Handtmann CNC Technologies in East Dundee, Illinois.  info@seoseonews.com (Super Admin) Tue, 05 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3747/1/New-Nexus-Vertical-Machining-Center-410A-from-Mazak-Innovative-Technology-Exceptional-Value/New-Nexus-Vertical-Machining-Center-410A-from-Mazak-Innovative-Technology-Exceptional-Value.html New from Mazak Corp. (Florence, KY), the Vertical Center (VC) Nexus 410A achieves new levels of productivity and versatility for vertical machining tasks, all at an exceptional value for the investment. It is part of the new Nexus series of machine tools from Mazak, focused on providing advanced technology, increased productivity, and outstanding value for metalworking manufacturers. info@seoseonews.com (Super Admin) Tue, 05 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3697/1/Daewoo-DHP-4000-Horizontal-Machining-Center---Greater-SpeedGreater-Economy/Daewoo-DHP-4000-Horizontal-Machining-Center---Greater-SpeedGreater-Economy.html DHP-4000 joins the Doosan Infracore family of Daewoo high speed, high power horizontal machining centers.  info@seoseonews.com (Super Admin) Fri, 01 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3673/1/VMC-CNCs-include-tool-and-workpiece-probing/VMC-CNCs-include-tool-and-workpiece-probing.html As well as introducing tool and workpiece probing cycles as standard on a CNC system for VMCs, a comprehensive MACH display will include two- and multi-axis CNC systems info@seoseonews.com (Super Admin) Thu, 31 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3660/1/Daewoo-Introduces-New-Vertical-Machining-Center/Daewoo-Introduces-New-Vertical-Machining-Center.html Doosan Infracore has introduced the DMV 6030 vertical machining center with wide box type guideways that the company says provide long-term rigidity and accuracy. The guideways are induction hardened and precision ground. info@seoseonews.com (Super Admin) Wed, 30 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3657/1/Automate-Or-Die/Automate-Or-Die.html Shops in high-mix, low-volume production environments no longer can expect to compete simply by running lines of stand alone machining centers with an operator at each one. info@seoseonews.com (Super Admin) Wed, 30 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3639/1/Vertical-machining-centres-cut-patterns/Vertical-machining-centres-cut-patterns.html Producer of low volume reaction injection moulded parts and polyurethane castings uses five vertical machining centres to cut master pattern equipment from polyurethane tooling board info@seoseonews.com (Super Admin) Tue, 29 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3627/1/Vertical-machining-centres-machine-composites/Vertical-machining-centres-machine-composites.html The latest innovations in vertical spindle machining centers for the aerospace, heavy equipment, off-road, energy and job shop industries include VMCs for titanium and composites machining info@seoseonews.com (article admin) Mon, 28 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3611/1/High-Tech-Vertical-Machines-with-3D-Controls-at-an-Unbeatable-Price/High-Tech-Vertical-Machines-with-3D-Controls-at-an-Unbeatable-Price.html As one of its main highlights in the field of Vertical Machining Centers, DMG will present the DMC 35 V Series to IMTS visitors in Chicago.  info@seoseonews.com (article admin) Sat, 26 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3609/1/Big-Rotating-and-Dead-Centers/Big-Rotating-and-Dead-Centers.html Pratt Burnerd International (www.pratt-burnerd.co.uk) has launched a new range of high accuracy big centers, available for both manual and CNC machines, suitable for the oil and energy industries. The centers can also be used for any application where large components need to be accurately turned, ground or bored. info@seoseonews.com (article admin) Sat, 26 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3561/1/Three-5-axis-machining-centres-suit-medical-sector/Three-5-axis-machining-centres-suit-medical-sector.html Three 5-axis machining centres are intended for precision engineering companies for the manufacture of medical devices (surgical and general instruments) and implants info@seoseonews.com (article admin) Thu, 24 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3528/1/Vertical-machining-centres-precisely-cut-Inconel/Vertical-machining-centres-precisely-cut-Inconel.html Latest high speed vertical machining centre used by an aerospace subcontract machining firm is maintaining 5 micron accuracy in the complex machining of Inconel components info@seoseonews.com (article admin) Tue, 22 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3526/1/Encoders-upgrade-vertical-machining-centre/Encoders-upgrade-vertical-machining-centre.html After fitting linear encoders to a VMC, an equivalent machining test confirmed that the 3 micron inaccuracy previously experienced when machining beryllium had reduced to zero in the X-axis info@seoseonews.com (article admin) Tue, 22 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3507/1/Different-Directions-In-Machining-Center-Motion/Different-Directions-In-Machining-Center-Motion.html The traditional machining center has axis motors that push in one direction or the other along X, Y and Z. In the 1990s, all of us who attend machine tool trade shows learned that this wasn’t the only way to design the machine. info@seoseonews.com (article admin) Mon, 21 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3503/1/Machining-centre-5-axis-mills-Al-and-non-metals/Machining-centre-5-axis-mills-Al-and-non-metals.html For machining non-ferrous metals and non-metals a 5-axis machining centre a more stiffness to the 5-axis cutting head than is normally associated with machines of this type info@seoseonews.com (article admin) Mon, 21 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3452/1/Larger-vertical-machining-centre-acquired/Larger-vertical-machining-centre-acquired.html Having acquired a large capacity VMC, and oil and gas industry components supplier can now cost-effectively machine 2.5m long workpieces in one set-up info@seoseonews.com (article admin) Fri, 18 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3449/1/Large-horizontal-machining-centres-come-to-UK/Large-horizontal-machining-centres-come-to-UK.html Two large horizontal twin pallet machining centres feature 'Box in Box' structural design for robust, high speed machining excellence, reliability and cost effectiveness info@seoseonews.com (article admin) Fri, 18 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3351/1/Variaxis-730-5X-Machining-Center-with-50-Taper-Spindle-Significant-Productivity-Gains-Through-Process-Integration/Variaxis-730-5X-Machining-Center-with-50-Taper-Spindle-Significant-Productivity-Gains-Through-Proce.html In 1999, Mazak Corporation introduced the first Variaxis, a vertical machining center with tilting rotary table to perform five-face machining and simultaneous 5-axis machining. The outstanding results were higher accuracies due to avoiding multiple fixtures and greater economy due to avoiding the need for multiple machines. info@seoseonews.com (article admin) Wed, 09 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3695/1/Daewoo-DMV-6030-Vertical-Machining-Center/Daewoo-DMV-6030-Vertical-Machining-Center.html The new Daewoo DMV 6030 vertical machining center from Doosan Infracore is an economical workhorse that's built to take heavy cuts in tough materials, and produce high accuracy with mirror finishes. info@seoseonews.com (Super Admin) Tue, 01 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3692/1/SV-48H-Vertical-Machining-Center-by-Johnford-Heavy-Duty-VMC-Boasts-Generous-Y-Axis-Capacity/SV-48H-Vertical-Machining-Center-by-Johnford-Heavy-Duty-VMC-Boasts-Generous-Y-Axis-Capacity.html o Generous capacity (48" x 28" x 25" XYZ travels)o 20 HP spindle with 2-speed gearbox head provides full power at 305 RPM info@seoseonews.com (Super Admin) Tue, 01 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3215/1/VMC-Control-For-Cost-Competitive-Mini-Mill/VMC-Control-For-Cost-Competitive-Mini-Mill.html To meet increased demand, the latest batch of Semco MCV 300 Mini Mill vertical machining centres has been ordered with Anilam 6000 Series multi-axis CNC systems from ACI Europe info@seoseonews.com (article admin) Tue, 01 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3187/1/12-axis-mill-turn-centre-concept-shown/12-axis-mill-turn-centre-concept-shown.html As well as showing a 'concept' 12-axis mill-turn centre for machining complex products, a UK Open House also showed the latest turning centres info@seoseonews.com (article admin) Mon, 31 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3169/1/Four-turret-type-vertical-turning-centres/Four-turret-type-vertical-turning-centres.html Four different size 'turret-type' vertical turning centres have been added to the range of Doosan Infracore machine tool products available from Mills Manufacturing Technology info@seoseonews.com (article admin) Mon, 31 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3164/1/Vertical-machining-centres-are-ruggedly-built/Vertical-machining-centres-are-ruggedly-built.html Vertical machining centres have a rugged construction (heavily-ribbed Meehanite) which absorbs vibration and limits the effects of thermal distortion even during the heaviest of cutting conditions info@seoseonews.com (article admin) Sat, 29 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3160/1/Machining-centre-mills-to-nano-level-accuracy/Machining-centre-mills-to-nano-level-accuracy.html Fitted with systems to control machining vibrations a high accuracy, vertical machining centre is claimed to mill small plastics injection moulds to nano level accuracy info@seoseonews.com (article admin) Sat, 29 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3154/1/Horizontal-machining-centres-reduce-vibration/Horizontal-machining-centres-reduce-vibration.html A new generation of production horizontal machining centres feature massive cast-iron construction, with extensive internal ribbing on the castings to increase rigidity and damp vibrations info@seoseonews.com (article admin) Sat, 29 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3140/1/Compact-machining-centre-scope-extended/Compact-machining-centre-scope-extended.html Compact vertical machining centre now has an extended working envelope and will be shown at EMO by Haas along with a high speed VMC and a low-cost toolroom milling machine info@seoseonews.com (article admin) Fri, 28 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3134/1/Five-axis-vertical-machining-centre-is-affordable/Five-axis-vertical-machining-centre-is-affordable.html Offering simultaneous 5-axis machining at an affordable price, a vertical machining centre gives maximum versatility, as the trunnion table can be quickly, and easily, removed for 3-axis work info@seoseonews.com (article admin) Fri, 28 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3131/1/Vertical-machining-centre-adds-4-axis-capability/Vertical-machining-centre-adds-4-axis-capability.html An open-fronted vertical machining centre brought extra 4-axis machining capability for single set-up machining of multi-faced components at a UK valve manufacturer info@seoseonews.com (article admin) Fri, 28 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3119/1/Machining-Center-Expands-EDM-Business/Machining-Center-Expands-EDM-Business.html Since 1993, Wiesen EDM of Belding, Michigan, has been providing electrical discharge machining and milling services.  info@seoseonews.com (article admin) Thu, 27 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3118/1/High-Speed-Compact-VMC-Makes-Its-Mark-Controls-Make-Difference/High-Speed-Compact-VMC-Makes-Its-Mark-Controls-Make-Difference.html When Mike Meredith, owner of Workshop Wire Cut and Machine (Aurora, Ohio) saw the Chevalier (Santa Fe Springs, California) 1418 vertical machining center (VMC), the proverbial light bulb flashed for him. This five-person, 3,000-square-foot shop had been focused on wire EDM, servicing mostly mold/die builders in the Cleveland area. info@seoseonews.com (article admin) Thu, 27 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3107/1/Machining-The-Majority-Of-Job-Shop-Parts/Machining-The-Majority-Of-Job-Shop-Parts.html In a typical job shop, most of the CNC machines have capacity going to waste most of the time. Look to any of the vertical machining centers in your own shop, and you may see the reason why. info@seoseonews.com (article admin) Thu, 27 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3074/1/5-axis-machining-centre-turns-and-grinds-too/5-axis-machining-centre-turns-and-grinds-too.html Multi-function machining centre can machine, turn and grind complex components and has an extremely fast tool-to-tool time of 1.1s that works with a 60 position tool changing system info@seoseonews.com (article admin) Mon, 24 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3073/1/Twin-pallet-machining-centres-boost-output/Twin-pallet-machining-centres-boost-output.html Machining centres manufacture of aluminium compressor housings for automotive turbochargers, although other parts are also produced, such as engine and gearbox bracketry info@seoseonews.com (article admin) Mon, 24 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3072/1/Horizontal-machining-center-machines-optics/Horizontal-machining-center-machines-optics.html Custom built horizontal machining centre has machined the largest lightweight beryllium optic for an infrared optimised space telescope to be launched in 2013 info@seoseonews.com (article admin) Mon, 24 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3046/1/Machining-centre-with-5-axis-capability/Machining-centre-with-5-axis-capability.html A steady increase in subcontract work for the medical industry has prompted Caragh Tool and Die to invest in a fifth Hurco machining centre with 5-axis capability info@seoseonews.com (article admin) Sat, 22 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3014/1/Vertical-machining-centre-saves-the-day/Vertical-machining-centre-saves-the-day.html Special SS bar taps components, sourced outside the UK, did not meet quality standards so a UK machine shop, using a vertical machining centre, did the job properly info@seoseonews.com (article admin) Fri, 21 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2930/1/Larger-horizontal-machining-centre-introduced/Larger-horizontal-machining-centre-introduced.html Horizontal machining centre is the largest-capacity, high-production machine Haas has yet produced, and features a 40in x 32in x 35in work envelope and a 50-taper geared-head spindle info@seoseonews.com (article admin) Mon, 17 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2929/1/Vertical-machining-centres-gain-latest-CNC/Vertical-machining-centres-gain-latest-CNC.html Matchmaker VMC 820 and VMC 1100 vertical machining centres have been upgraded with Fanuc 0i-MC control built-in as an integral part of the machine and floor area requirement reduced info@seoseonews.com (article admin) Mon, 17 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2887/1/TRW-Opens-Plant-in-Slovakia-to-Support-Electric-Steering-Systems-Growth/TRW-Opens-Plant-in-Slovakia-to-Support-Electric-Steering-Systems-Growth.html  TRW Automotive Holdings Corp. today announced the opening of a new, technologically advanced manufacturing plant in Slovakia to support its position as a leader in the growing electric steering systems global market. info@seoseonews.com (article admin) Fri, 14 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2725/1/Vertical-machining-centre-offers-stable-cutting/Vertical-machining-centre-offers-stable-cutting.html Featuring heavy duty cast iron design with substantial ribbing to maximise rigidity and minimise vibration under cutting conditions, a VMC performs heavy duty milling info@seoseonews.com (article admin) Wed, 05 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2708/1/Variable-Horizontal-Machining-Center-Designed-For-Precision/Variable-Horizontal-Machining-Center-Designed-For-Precision.html MCM SpA (www.mcmspa.it) has developed a horizontal machining center that can be set up in a variety of configurations for high-speed, precision machining and flexible production. info@seoseonews.com (article admin) Tue, 04 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2685/1/Machining-centres-produce-hydraulic-parts-families/Machining-centres-produce-hydraulic-parts-families.html A manufacturer's on-going development in hydraulic pumps and motors is paralleled by the installation of multi-tasking machining centres for small and medium batch production info@seoseonews.com (article admin) Mon, 03 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2676/1/VMCs-Cut-High-Volume-Boost-Shop-Production/VMCs-Cut-High-Volume-Boost-Shop-Production.html To remain competitive in the parts manufacturing market, Jim Paas, vice president of Mistequay Group Ltd. (Saginaw, MI), knows that investment in new machining centers with the latest technology is essential--even if it means replacing machines only a few years old. info@seoseonews.com (article admin) Mon, 03 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2662/1/Machining-Center-delivers-5-axis-multi-plane-machining/Machining-Center-delivers-5-axis-multi-plane-machining.html Millac 800VH permits precision production of complex parts such as impellers, turbine blades, and electronic communication equipment. Full CNC indexing table (C-axis) utilizes curvic coupling equipped with scaled feedback standard and delivers clamping force of 8,675 lb-ft. Equipped with 31.5 sq in. pallet, machine incorporates heat-treated box ways, box-type bed, and automatic pallet changer. info@seoseonews.com (article admin) Sat, 01 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2632/1/High-performance-machining-centre-at-Siemens/High-performance-machining-centre-at-Siemens.html Heller deliver high performance MCi 25 horizontal machining centre for turbine blade production at Siemens power generation plant in Newcastle info@seoseonews.com (Super Admin) Thu, 29 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2622/1/Full-Featured-VMC-For-Under-40000/Full-Featured-VMC-For-Under-40000.html Fadal Machining Centers (www.fadal.com) has introduced a CNC vertical machining center designed for die/mold makers and parts producers who need a low cost, full-featured machine. info@seoseonews.com (Super Admin) Thu, 29 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2547/1/Integrating-Machining-Centers-Into-The-Work-Flow/Integrating-Machining-Centers-Into-The-Work-Flow.html Vanamatic Company (Delphos, Ohio) is no stranger to this magazine. We’ve covered this family-owned screw machine shop in the past with a story about setup reduction methods employed on the shop’s Conomatic multi-spindles. info@seoseonews.com (article admin) Sat, 24 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2495/1/Vertical-machining-centre-is-high-speed/Vertical-machining-centre-is-high-speed.html Equipped with a 20,000 rev/min spindle as standard, a vertical machining centre suits high speed machining applications in the mould and die and aerospace sectors info@seoseonews.com (article admin) Wed, 21 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2487/1/Vertical-machining-centres-lathes-and-millturns/Vertical-machining-centres-lathes-and-millturns.html A new range of vertical machining centres (VMC) is seen for the first time at EMO 2007, with new lathes and mill/turn centres from the Tornado and Alpha ranges info@seoseonews.com (article admin) Wed, 21 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2420/1/HMC-and-VMCs-solve-machining-problems/HMC-and-VMCs-solve-machining-problems.html At the MACH 2006 exhibition, Cincinnati will show a HMC and VMCs - including 5-axis types - as well as a heavy duty and precise mould machining package and a CNC mill/turn centre info@seoseonews.com (article admin) Fri, 16 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2414/1/5-axis-centre-machines-wide-materials-variety/5-axis-centre-machines-wide-materials-variety.html Extremely high 5-axis machine stability allows the Renault F1 Team to machine a wide variety of materials, including high silicon aluminium and high tungsten steel, as well as carbon fibre composites info@seoseonews.com (article admin) Fri, 16 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2396/1/Micro-Machining-Center-operates-with-zero-metal-contact/Micro-Machining-Center-operates-with-zero-metal-contact.html Model Zµ3500 uses temperature-controlled hydrostatic oil in hybrid spindle bearing, static pressure guides, and linear motor cooling system, virtually eliminating thermal distortion saturation time. At 25 hp, spindle reaches speeds of 30,000 rpm. Travels are 13.78 in X-axis and 11.8 in Y- and Z-axes. Positioning is accomplished with cooled scaled linear motors at 0.6 G in acceleration. Near absence of friction and vibration increases precision and reduces noise levels. info@seoseonews.com (article admin) Thu, 15 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2391/1/Vertical-machining-centres--raise-part-conformance/Vertical-machining-centres--raise-part-conformance.html Seven 5-axis, vertical machining centres, six equipped with individual 32-pallet storage systems, form the core of a Formula One racing team's high performance prismatic metalcutting capability info@seoseonews.com (article admin) Thu, 15 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2389/1/Machining-centres-and-mill-turn-centre-unveiled/Machining-centres-and-mill-turn-centre-unveiled.html Three new machine tools from 27 exhibits on the Mori Seiki stand will be a 5-axis vertical and a horizontal machining centre, and a three-turret mill-turn centre with Y-axis info@seoseonews.com (article admin) Thu, 15 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2387/1/Vertical-machining-centre-has-swivelling-head/Vertical-machining-centre-has-swivelling-head.html A 5-axis vertical machining centre features a thermally stabilised head with motor spindle that swivels about the B-axis, while the fifth CNC axis is provided by a horizontal rotary table info@seoseonews.com (article admin) Thu, 15 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2321/1/Modular-machining-centres-mill-at-high-speeds/Modular-machining-centres-mill-at-high-speeds.html Modular machining centdfes can be built up to 8m by 40m (X and Y axis) to order for machining large aluminium or composite components in the aerospace, automotive and marine industries info@seoseonews.com (article admin) Mon, 12 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2244/1/High-speed-CNC-machining-center/High-speed-CNC-machining-center.html The Argo A-56 vertical machining center is a 7.5-kW (10-hp), 40-taper model designed for production machining. Top spindle speed is 8,000 rpm (12,000 rpm available as an option) with rigid tapping as high as 6,000 rpm. Axis travel in XYZ is 560 mm x 410 mm x 410 mm (22" x 16" x 16"). info@seoseonews.com (article admin) Tue, 06 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2198/1/HMC-minimises-valve-machining-operations/HMC-minimises-valve-machining-operations.html It now only takes one CNC machining cycle to carry out almost all the machining operations on valve bodies at a precision engineering company using an OKK 4-axis CNC horizontal machining centre info@seoseonews.com (article admin) Sat, 03 Nov 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/2195/1/VMC-reduces-valve-part-machining-time-by-40/VMC-reduces-valve-part-machining-time-by-40.html Valve manufacturer reports that its latest vertical machining centre has machined a valve with 4,813 x 3mm diameter holes 40% quicker compared to the previous machine used for the task info@seoseonews.com (article admin) Fri, 02 Nov 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/2116/1/Heavy-duty-milling-centres-have-high-capacity/Heavy-duty-milling-centres-have-high-capacity.html Four heavy duty CNC milling machines and machining centres combine high-quality build and technologically advanced features for large capacity, heavy-duty milling performance info@seoseonews.com (article admin) Mon, 29 Oct 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/2082/1/Large-format-CNC-machining-centres-for-aerospace-pattern-and-mould-work/Large-format-CNC-machining-centres-for-aerospace-pattern-and-mould-work.html Recently introduced to the UK is the 'Poseidon' CNC machining centres range, from Nottingham-based, CMS UK. Keen interest has already been expressed by companies needing to remain competitive in the high speed, precision machining of large size components and materials. info@seoseonews.com (article admin) Thu, 18 Oct 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/2038/1/Machining-Centers-Offer-High-Quality-Programming-Power/Machining-Centers-Offer-High-Quality-Programming-Power.html an integrated, global supplier of PVC pipe, which is used in residential and commercial plumbing—has continually upgraded its ability over the past several years to produce all of its required plastic injection molds in its own toolroom.  info@seoseonews.com (article admin) Fri, 12 Oct 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/2016/1/Machining-centres-have-high-accuracy/Machining-centres-have-high-accuracy.html Machining centres characterised by the upside down T shape structure and by a single compact base have been designed for machining aluminium, steel and cast iron components info@seoseonews.com (article admin) Wed, 10 Oct 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/2009/1/Vertical-machining-centre-helps-subcontractor/Vertical-machining-centre-helps-subcontractor.html A Ward CNC-supplied Hartford Power centre Pro-1000 vertical machining centre has been installed at Currie Engineering of Londonderry, a world-class sub-contract machinist info@seoseonews.com (article admin) Tue, 09 Oct 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/2007/1/Sliding-headstock-mill-turn-centre-acquired/Sliding-headstock-mill-turn-centre-acquired.html A new Sigma 20 CNC sliding headstock mill-turn centre from Tornos to has been acquired by a clockmaker to manufacture a host of tiny components for its intricate timepiece mechanisms info@seoseonews.com (article admin) Tue, 09 Oct 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1964/1/VMC-Increases-Productivity-For-Machining-And-Forging-Shop/VMC-Increases-Productivity-For-Machining-And-Forging-Shop.html Bourdon Forge (Middletown, Connecticut) is a job shop that provides forgings and machines forged parts, including D-rings, snaps and other safety hardware that attach to safety belts and parachutes. info@seoseonews.com (article admin) Sat, 29 Sep 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1960/1/Compact-vertical-machining-centre-is-fast/Compact-vertical-machining-centre-is-fast.html Vertical machining centre with 3D-CNC offers an 8,000 rev/min spindle and a 20-tool magazine with double gripper, for short chip-to-chip times and high rapid traverse speeds info@seoseonews.com (article admin) Fri, 28 Sep 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1959/1/Controller-boosts-machining-centre-cell-efficiency/Controller-boosts-machining-centre-cell-efficiency.html Automated machining system pallet cell technology has been further enhanced with a new PC-based cell controller using the open-source SUSE Linux operating system info@seoseonews.com (article admin) Fri, 28 Sep 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1881/1/VMC-Machines-Large-Cavity-Molds-For-Small-Machines/VMC-Machines-Large-Cavity-Molds-For-Small-Machines.html Semco Plastic Company Incorporated (St. Louis, Missouri) manufactures an extensive line of custom injection and blow-molded thermoplastic and thermoset products from molds that are designed, machined and built at its in-house moldmaking facility. info@seoseonews.com (article admin) Thu, 13 Sep 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1747/1/Vertical-machining-centre-has-high-speed-CNC/Vertical-machining-centre-has-high-speed-CNC.html A high-performance vertical machining centre features a generous 1016 x 660 x 635mm work cube, a 12,000 rev/min inline direct-drive spindle and a high-speed control with full 'look-ahead' info@seoseonews.com (article admin) Wed, 22 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1738/1/Horizontal-machining-centre-loading-simplified/Horizontal-machining-centre-loading-simplified.html A horizontal machining centre has an efficient positive 180 deg rotating pallet change system that provides convenient pallet accessibility for simplified work loading info@seoseonews.com (article admin) Tue, 21 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1659/1/VMC-rigidity-favours-high-metal-removal-rates/VMC-rigidity-favours-high-metal-removal-rates.html Vertical machining centre shown at MACH 2006 revealed its in-built rigidity from high grade FC-30 iron castings with a vibration absorbing ribbed structure for high stock removal, when milling info@seoseonews.com (article admin) Thu, 16 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1658/1/Vertical-machining-centre-has-high-performance/Vertical-machining-centre-has-high-performance.html A high performance vertical machining centre has, as standard, an innovative 12,000 rev/min inline direct-drive spindle, an ultra-fast tool changer and 35m/min rapid feeds info@seoseonews.com (article admin) Thu, 16 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1623/1/Machining-centres-and-CNC-hobber-to-make-UK-debut/Machining-centres-and-CNC-hobber-to-make-UK-debut.html Two new machining centers along with a CNC gear hobber from Mitsubishi will be on show for the very first time in the UK at a forthcoming Open House staged by Yamazen info@seoseonews.com (article admin) Sat, 04 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1622/1/Machining-centre-builder-adds-on-CNC-lathes/Machining-centre-builder-adds-on-CNC-lathes.html In a radical reshaping of its metalcutting product range, machining centre and milling machine supplier, Hurco Europe, launched three turning machines equipped with conversational CNC system info@seoseonews.com (article admin) Sat, 04 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1618/1/Machining-centre-can-act-as-a-CMM/Machining-centre-can-act-as-a-CMM.html An Italian probing systems manufacturer has developed software that will allow a machining centre or CNC milling machine to be used as a CMM to check wokpieces info@seoseonews.com (article admin) Fri, 03 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1607/1/Vertical-machining-centres-take-heavy-loads/Vertical-machining-centres-take-heavy-loads.html Cincinnati Machine exhibits at EMO 2007 will include vertical machining centes equipped for 5-axis and five-sides machining of workpieces up to 10,000kg info@seoseonews.com (article admin) Wed, 01 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1581/1/CNC-machining-centres-keep-to-specifications/CNC-machining-centres-keep-to-specifications.html The ability of one supplier's range of CNC machine tools ability to maintain productivity, accuracy and surface finishes over a long period of time led a precision machine shop to buy more info@seoseonews.com (article admin) Mon, 30 Jul 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1438/1/Machining-Center-Trends-Have-Implications-For-CAM/Machining-Center-Trends-Have-Implications-For-CAM.html At a recent presentation where he described some developments in his company's CAM software, Delcam product manager Mark Forth spoke of two clear trends in the way machining centers are being used today. info@seoseonews.com (article admin) Sat, 07 Jul 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1433/1/Controller-transplant-saves-machining-centre/Controller-transplant-saves-machining-centre.html ROY Milan of JAR Engineering faced the prospect of scrapping his Kasuga machining centre while the core of the CNC machine was still fully functional. info@seoseonews.com (article admin) Fri, 06 Jul 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1432/1/Super-fast-machining-centre/Super-fast-machining-centre.html THE new ULTRA4 super fast machining centre is a new generation machine that offers substantial benefits for mould and die makers who need to meet short lead times while reducing costs and improving product quality. info@seoseonews.com (article admin) Fri, 06 Jul 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1344/1/Automatic-CNC-machining-centre/Automatic-CNC-machining-centre.html FIRST time Austech exhibitor Elumatec Australiawill release the Elumatec SBZ122/30 CNC machining centre for automatic, accurate, repetitive routing, milling, drilling and processing of aluminium profiles. info@seoseonews.com (article admin) Sat, 30 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1295/1/Desktop-CNC-machining-centre/Desktop-CNC-machining-centre.html CNC Motion Systems has developed a desktop CNC machining centre with full 3-axis servo drive. info@seoseonews.com (article admin) Thu, 28 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1042/1/New-CNC-Machining-Center-for-Nested-Base-Manufacturing/New-CNC-Machining-Center-for-Nested-Base-Manufacturing.html Hendrick introduces the 20ZXGN-ATCT6-NBM CNC Machining Center featuring a 6 station rotary automatic tool changer mounted on the front of a 12 HP high frequency router spindle for rapid tool change on the fly, 5 x 5 32 mm drill block with independent drill actuation by CNC program and high speed accurate machining capabilities. info@seoseonews.com (article admin) Thu, 31 May 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1034/1/Datron-Dynamics-Introduces-the-Excelsior-Lite-A-CNC-Machining-Center-Designed-as-an-Entre-to-High-Speed-Machining-with-Micro-Tools/Datron-Dynamics-Introduces-the-Excelsior-Lite-A-CNC-Machining-Center-Designed-as-an-Entre-to-High-.html Datron’s excelsior® Lite was designed specifically for manufacturers who need their innovative high-speed technology but, for budget reasons, are unable to afford a machining center made exclusively for small tooling - 1/4 inch and under. info@seoseonews.com (article admin) Thu, 31 May 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1027/1/Five-axis-vertical-machining-centre/Five-axis-vertical-machining-centre.html The high rigidity tilting rotary table improves positioning accuracy and speed. A bigger work envelope allows larger work pieces to be manufactured, and the slim design parts50 taper spindle nose provides longer reach for tools, and better part accessibility. info@seoseonews.com (article admin) Wed, 30 May 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1010/1/Machining-centre-eases-furniture-bottleneck/Machining-centre-eases-furniture-bottleneck.html Fitted furniture maker has overcome major production bottleneck by installing a CNC woodworking machining centre, which has an easy-to-use multi-positioning programming softwareA major production bottleneck has been removed at fitted furniture maker, Roundel, with the introduction of a Masterwood Project 415 panel CNC machining centre. Roundel design, manufacture and install bespoke kitchens, bedrooms and bathroom furniture for major house builders and the domestic market. info@seoseonews.com (article admin) Tue, 29 May 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/951/1/A-Parallel-Approach-for-Machining-Centers/A-Parallel-Approach-for-Machining-Centers.html An alternative architecture for CNC machining systems has stayed in the background, despite its potential for quicker machining of complicated geometries. Called parallel or "strut" kinematics, it's analogous to parallel-link robotics in the way the tool is positioned. info@seoseonews.com (article admin) Tue, 22 May 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/901/1/Vertical-and-horizontal-machining-centres/Vertical-and-horizontal-machining-centres.html ALFEX CNC and Haas will display a number of CNC machines at the Melbourne Austech 2005 show, including the EC-400 twin-pallet horizontal machining centre, the VM-3 Mould Maker vertical machining centre and the Super VF-2SS with five-axis trunnion table. The TL-2 CNC Toolroom Lathe and TM-1 CNC Toolroom Mill with intuitive programming will also be on display. info@seoseonews.com (article admin) Wed, 16 May 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/861/1/Machining-Center-For-Light-Metal-Parts/Machining-Center-For-Light-Metal-Parts.html Alfing Corp. (www.alfing.com) has introduced its new AL-series multi-spindle 5-axis machining center concept designed especially for machining complex, light-metal parts in medium to high volumes. The AL 204 is the leading machine in the series, with four individually driven box spindles arranged for HSK 63 tooling with separate anti-friction ways. Alfing says the primary new production advantage of the series is that it permits higher Z-axis accuracy in a multi-spindle machine than has been possible previously because of the company's new, patented individual spindle compensation. info@seoseonews.com (article admin) Wed, 09 May 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/603/1/CNC-Freight-Services-Successfully-Charters-Antonovs-for-Sudan-EPCC-Client-Shipments/CNC-Freight-Services-Successfully-Charters-Antonovs-for-Sudan-EPCC-Client-Shipments.html Transports to Sudan Very Healty on the Back of Energy Project Business Khartoum, Sudan (PRWEB) September 20, 2005 -- CNC Freight Services Sdn Bhd, Global Project Logistics Network member based in Port Klang, Malaysia, recently announced the successful execution of two air charters of Antonov 124 in July. CNC successfully delivered 200 metric ton of oilwell equipments which were urgently required by their customers in Sudan. info@seoseonews.com (article admin) Fri, 23 Feb 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/460/1/Machining-Point-Control-Improves-Machining-Precision/Machining-Point-Control-Improves-Machining-Precision.html Machining Point Control (MPC), an enhancement to servo systems made by GE Fanuc Automation, a unit of GE Industrial (Charlottesville, VA) can detect and control machine vibration at the machining point. info@seoseonews.com (Super Admin) Thu, 15 Feb 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/376/1/Why-could-CNC-Machine-shops-be-made-for-MIS/Why-could-CNC-Machine-shops-be-made-for-MIS.html CNC machine shops and CNC machine milling in general could very well be made for Machine Information Systems.Why?Because CNC cutting machines; such as a CNC plasma cutting machine, a CNC router table and CNC lathe machine, all perform repetitive tasks. info@seoseonews.com (Super Admin) Sun, 11 Feb 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/236/1/Plastic-Contract-Manufacturing/Plastic-Contract-Manufacturing.html Plastic contract manufacturing is the process of manufacturing plastic products on a contract basis. There are many contract manufacturers of plastic products, rubber products and other specialty chemical products. They produce fabricated and extruded plastic products. The plastic fabrication facility of most of the plastic contract manufacturers include the latest Computerized Numerical Control (CNC) routers, mills and lathes for top quality machining of plastic parts and products. info@seoseonews.com (article admin) Sat, 03 Feb 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/442/1/-Lights-Out-With-A-Lighter-Commitment/-Lights-Out-With-A-Lighter-Commitment.html A “lights out” process is not entirely unattended. It gets lots of attention while the lights are still on. info@seoseonews.com (article admin) Thu, 01 Feb 2007 00:00:00 -0600