http://www.cnccncmachines.com en-us http://www.cnccncmachines.com N/A info@seoseonews.com Wed, 27 Aug 2008 21:55:14 -0500 20 http://www.cnccncmachines.com/articles/5286/1/Peanut-Grinder-produces-minimal-fines/Peanut-Grinder-produces-minimal-fines.html Specifically designed for coarse granulation of peanuts, walnuts, pecans, and other types of nut grinding applications, Peanut Gran-U-Lizer(TM) utilizes roll surface that produces uniform grind size with minimal fines.  info@seoseonews.com (Super Admin) Wed, 27 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5265/1/Machine-Boosts-Productivity-Of-Aerospace-Component-Manufacturer/Machine-Boosts-Productivity-Of-Aerospace-Component-Manufacturer.html The High Temperature Components Section of aerospace manufacturer Centrax of Newton Abbot, Devon, England, specializes in the machining of turbine nozzle guide vanes and rotor blades for air- and land-based gas turbine engines.  info@seoseonews.com (Super Admin) Mon, 25 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5213/1/CNC-Grinder-Helps-Start-A-Business/-CNC-Grinder-Helps-Start-A-Business.html With the economy beginning to head south, many manufacturers were searching for ways to cut costs during the late 1990s. To many, this would seem to be an inopportune time to start a niche grinding business. However, viewing the proverbial glass as being half full, Joe Scolaro saw this period as a window of opportunity. info@seoseonews.com (Super Admin) Mon, 18 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5212/1/Hybrid-Grinders-For-High-End-Parts/Hybrid-Grinders-For-High-End-Parts.html Maintaining tight tolerances is essential in the production of large, expensive parts that serve critical applications. For this reason, reducing the number of machine setups required to complete these low-volume, specialty parts has become a primary focus of the production strategies in many metalworking organizations.  info@seoseonews.com (Super Admin) Mon, 18 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5211/1/Jig-Grinding-On-A-Machining-Center/Jig-Grinding-On-A-Machining-Center.html Roughing and finishing on a single machine, using a single setup, has appeal for most shops. The advantages in time savings and accuracy are obvious. Eliminating the transport of workpieces between machines, as well as the setup for those secondary operations, is a boon for throughput. Critical features that need to maintain dimensional relationships can be much more reliably produced if machined complete in one clamping. info@seoseonews.com (Super Admin) Mon, 18 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5210/1/Precision-Twin-Spindle-CNC-Internal-Grinding-Machine/Precision-Twin-Spindle-CNC-Internal-Grinding-Machine.html  The IGM-15NC2 twin spindle CNC internal grinding machine eliminates multiple chucking and is said to simplify setup, boost productivity and optimize workpiece dimensional accuracy. The workpiece stays fixed on one machine, and the spindles needed for the multiple grinds ride on the grinder's high-precision wheelhead. info@seoseonews.com (Super Admin) Mon, 18 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5180/1/Grinding-Out-Hardened-Parts/Grinding-Out-Hardened-Parts.html Before deciding whether or not to hard turn or grind workpieces over 45 Rc, shops should ensure they're comparing "apples to apples" — current technology to current technology. Instead, many evaluate the latest turning centers versus outdated grinding systems.  info@seoseonews.com (Super Admin) Wed, 13 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5179/1/Grinder-with-wear-free-guideways/Grinder-with-wear-free-guideways.html As an important feature of the Magerle MFP 50 grinder, hydrostatic wrap-around guideways used in the Y-axis are reportedly wear-free and offer rigidity and load capacity, info@seoseonews.com (Super Admin) Wed, 13 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5175/1/Jones--Shipman-Shows-quotProductivity-Boostingquot-Precision-Grinding-Machines-With-Benefits-Of-Easy-Control-At-IMTS08/Jones--Shipman-Shows-quotProductivity-Boostingquot-Precision-Grinding-Machines-With-Benefits-Of.html PRESS INFORMATION FROM JONES & SHIPMAN AT IMTS08 (Booth B6760) Jones & Shipman - Holroyd, world leaders in the supply of high quality, precision cylindrical, surface, creepfeed, gear and rotor grinding machine systems info@seoseonews.com (Super Admin) Wed, 13 Aug 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5103/1/Time-Saving-Centerless-Grinder/Time-Saving-Centerless-Grinder.html The company will demonstrate its KC-300 five-axis CNC combination-type in-feed] through-feed centerless grinding machine with automatic parts feeder, autoloading and automatic sizing. The highly rigid grinder is designed for production runs of parts in the 1.6 mm to 120mm diameter range. info@seoseonews.com (Super Admin) Thu, 31 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5101/1/Internal-Universal-Grinding-Center/Internal-Universal-Grinding-Center.html The 150 CNC internal universal grinding center is said to offer flexibility for handling a wide range of ID and OD chucked grinding capabilities. info@seoseonews.com (Super Admin) Thu, 31 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5100/1/Process-Innovations-For-Production-Grinding/Process-Innovations-For-Production-Grinding.html On display will be a "value--engineered" Viking SuperSeries 200 CNC centerless grinder and a GV-600 double-disc grinder with rotary carrier. In addition, there will be interactive presentations covering a range of innovative production grinding processes, including advanced CBN grinding applications, a "lean" CAM lobe grinding process, reliability and maintainability simulation techniques, and an Internet-based system for remote machine monitoring and diagnosis. info@seoseonews.com (Super Admin) Thu, 31 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5070/1/Automotive-grinding/Automotive-grinding.html In recent years, purchasers of capital equipment have called increasingly for supplier-provided life cycle cost analysis to help them more accurately project overall return on investment. The demand is especially pronounced in the automotive industry, causing suppliers to focus on life-cycle cost issues in upgrading their products.  info@seoseonews.com (Super Admin) Mon, 28 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5068/1/Realizing-the-CNC-thread-grinding-concept/Realizing-the-CNC-thread-grinding-concept.html Hardware and software capabilities must be combined for productivity with precision in thread grinding. The critical element in achieving the full potential of CNC automation for thread grinding is the ability of the diamond roll to contour-dress wheel forms, accurately and automatially. info@seoseonews.com (Super Admin) Mon, 28 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5027/1/Dresser-Lets-Grinders-Grind/Dresser-Lets-Grinders-Grind.html Rollomatic built its ProfileSmart 6-axis CNC grinding-wheel dresser to eliminate the machine downtime from dressing wheels on grinding machines themselves. info@seoseonews.com (Super Admin) Wed, 23 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4992/1/Third-Schneeberger-tool-and-cutter-grinder-added/Third-Schneeberger-tool-and-cutter-grinder-added.html Adding on its third Scheeberger tool and cutter grinder, Scorpion Tooling said its Quinto software's e-grind feature enables production of more complex tooling and reduces programming time. info@seoseonews.com (Super Admin) Sat, 19 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4949/1/CNC-Cylindrical-Grinding-Machines/CNC-Cylindrical-Grinding-Machines.html The company will introduce two CNC cylindrical grinding machines. Resulting from technical collaboration with the Grisetti Company, Italy, these universal and angular CNC cylindrical grinding machines both feature Fanuc OGC controls, 8" or 12" swing with 20" to 40" distance between centers, a semi-enclosed guard or a totally redesigned full enclosure.  info@seoseonews.com (Super Admin) Mon, 14 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4909/1/Grinding-machine-builders-Blohm-and-Jung-combine/Grinding-machine-builders-Blohm-and-Jung-combine.html The German builders of CNC surface grinding machines, Blohm and Jung, have merged to form Blohm Jung in order to improve market opportunities. info@seoseonews.com (Super Admin) Wed, 09 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4895/1/Shaft-grinder/Shaft-grinder.html The Mikrosa Kronos S centerless grinder for small shaft-type parts combines two processes — straight and 15°-angle plunge grinding — in one unit by changing out the grinding-spindle unit.  info@seoseonews.com (Super Admin) Sat, 05 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/5107/1/Production-platform-varies-cylindrical-grinding/Production-platform-varies-cylindrical-grinding.html The Studer S22 modular production cylindrical grinding platform allows different machines to be configured for specific types or families of parts and grinding processes. info@seoseonews.com (Super Admin) Tue, 01 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4850/1/Grinder-series/Grinder-series.html G-Series industrial grinders by Ingersoll-Rand tackle various grinding, cutting, and material-removal applications. Suitable for light material removal, cleaning rough castings and welds, deburring parts, and other finishing, the G1 has 0.4 hp and comes in straight, angle, and extended straight configurations.  info@seoseonews.com (Super Admin) Tue, 01 Jul 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4792/1/Grinding-measurement-and-control/Grinding-measurement-and-control.html VM20 systems from Balance Systems Corp. incorporate grinding-wheel balancing, touch sensing and gaging in one unit, and they configure for specific applications with the addition of function modules info@seoseonews.com (Super Admin) Wed, 25 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4785/1/Shops-harness-the-power-of-creepfeed-grinding/Shops-harness-the-power-of-creepfeed-grinding.html Eric Reutimann, owner of Spectra-Tech in Hanover Park, Ill., refers to his creepfeed-grinding operation as "abrasive machining," and he does so with good reason. Creepfeed grinding, in some instances, easily removes 0.200 to 0.300 in. of stock in two or three passes  info@seoseonews.com (Super Admin) Tue, 24 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4767/1/Updated-electrode-grinding-machine/Updated-electrode-grinding-machine.html Operators of TEG-2 and TEG-3 tungsten-electrode-grinding machines from Huntingdon Fusion Techniques Ltd., Carms, UK, no longer need to worry about getting grinding dust in their faces. info@seoseonews.com (Super Admin) Mon, 23 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4762/1/Toyoda-Pallet-Storage-Grinder/Toyoda-Pallet-Storage-Grinder.html THE  compact Vertical Pallet Pool (VPP) is an economical option for expanding storage and automating production on one machining center.  info@seoseonews.com (Super Admin) Mon, 23 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4694/1/New-Kellenberger-Kel-Vita-Universal-Grinding-Machine-at-IMTS-08/New-Kellenberger-Kel-Vita-Universal-Grinding-Machine-at-IMTS-08.html Kellenberger, a member of The Hardinge Group, is introducing at IMTS the Kel-Vita . . . a cost-effective universal ID/OD grinding machine that meets the diversity of customer's needs and workpieces up to a length of 1000mm.  info@seoseonews.com (Super Admin) Sat, 14 Jun 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4628/1/Abrasive-Grinding-Center-Optimizes-Interrupted-Cuts/Abrasive-Grinding-Center-optimizes-interrupted-cuts.html Milldale, CT - April 15, 2008 -- MAX-TEK®, LLC has introduced the MAX-TEK STC-400 Superabrasive Turning Center, featuring hydraulic part holding and tailstock for the machining of difficult interrupted cut components, such as centrifugal pump and compressor impellers up to 25" in diameter.  info@seoseonews.com (Super Admin) Sat, 31 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4590/1/Carbide-jig-grinding-tool-life-cost-reduced-by-70/Carbide-jig-grinding-tool-life-cost-reduced-by-70.html A Hauser jig grinding machine is being used to machine 'hard materials' to very high accuracies and exacting tolerances and has reduced tool life costs by 70%. info@seoseonews.com (Super Admin) Tue, 27 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4581/1/Tool-and-cutter-grinding-software-expanded/Tool-and-cutter-grinding-software-expanded.html For Walter CNC tool and cutter grinding machines, grinding software with integrated simulation can now process step tools, even with rear-line geometries. info@seoseonews.com (Super Admin) Mon, 26 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4557/1/New-Kellenberger-Kel-Vita-Universal-Grinding-Machine-At-IMTS-08/New-Kellenberger-Kel-Vita-Universal-Grinding-Machine-At-IMTS-08.html  Kellenberger, a member of The Hardinge Group, is introducing at IMTS the Kel-Vita . a cost-effective universal ID/OD grinding machine that meets the diversity of customer's needs and workpieces up to a length of 1000mm. info@seoseonews.com (Super Admin) Fri, 23 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4553/1/Hybrid-diamond-dressing-ups-grinding-performance/Hybrid-diamond-dressing-ups-grinding-performance.html Meister Abrasives said hybrid bonding for rotary grinding wheel dressing tools gives the natural porosity of a vitrified bond structure and enables CBN grinding wheels to perform consistently better. info@seoseonews.com (Super Admin) Thu, 22 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4409/1/Reishauers-Newest-Generation-of-Large-Continuous-Generating-Gear-Grinders/Reishauers-Newest-Generation-of-Large-Continuous-Generating-Gear-Grinders.html What do the gears that end up in trains, wind generators, speed reducers, marine transmissions, off-road equipment and printing presses have in common? They must run quietly, carry heavy loads, have excellent pitch variation, be VERY accurate and offer a long service life.  info@seoseonews.com (Super Admin) Sat, 03 May 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4365/1/Dressing-For-Grinding-Success/Dressing-For-Grinding-Success.html A CUTTING TOOL is only as accurate as the grinding wheel that produces it. So, shops that manufacture cutting tools must precisely true and dress grindingwheel shapes to consistently produce high-accuracy tools to meet customer demands for evertightening part tolerances. info@seoseonews.com (Super Admin) Sat, 26 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4279/1/Grinder-handles-more-capacity-between-centers/Grinder-handles-more-capacity-between-centers.html The KX300P gear grinder from Kapp Technologies uses discontinuous form-grinding and continuous generating grinding processes with nondressable, electroplated CBN or dressable tools for roughing and finishing.  info@seoseonews.com (Super Admin) Wed, 16 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4278/1/Grinder-features-Fanuc-controls/Grinder-features-Fanuc-controls.html Monza Corp. has added features to its Model CNC 1 entry-level centerless grinders that previously were available only on its more advanced grinders. The company says its Model CNC 1 features Fanuc Powermate I D controls that store program parameters for different parts and provide control for the new option of Constant Surface Speed (CSS) on the entry-level machines.  info@seoseonews.com (Super Admin) Wed, 16 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4237/1/Gear-grinder-uses-two-processes/Gear-grinder-uses-two-processes.html The KX300P gear grinder from Kapp Technologies uses discontinuous form-grinding and continuous generating grinding processes with nondressable, electroplated CBN or dressable tools for roughing and finishing.  info@seoseonews.com (Super Admin) Fri, 11 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4236/1/Next-generation-grinding/Next-generation-grinding.html Streamlining specific production processes leads to innovative grinding methods and machine designs that compliment them. info@seoseonews.com (Super Admin) Fri, 11 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4220/1/Five-axis-CNC-tool-grinder-keeps-prices-down/Five-axis-CNC-tool-grinder-keeps-prices-down.html A UK tooling company has added on a second Walter Helitronic Power CNC 5-axis tool grinder to keep tooling prices down and maintain a healthy order book, said Koerber Schleifring info@seoseonews.com (Super Admin) Thu, 10 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4209/1/Precise-Cut-For-Sparkling-Jewels-Using-Automated-Gem-Cutting-Machine/Precise-Cut-For-Sparkling-Jewels-Using-Automated-Gem-Cutting-Machine.html Rubies, emeralds and tourmalines can only sparkle with the right cut. Since early this year, a fully automatic machine has undertaken this grinding process for Paul Wild GmbH. It saves up to 30 percent of the precious material and grinds the gems with greater precision. info@seoseonews.com (Super Admin) Wed, 09 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4184/1/Vertical-grinder/Vertical-grinder.html With two stations on its turret-type wheelhead, the Taiyo Koki IGV-3NT vertical grinding machine switches among internal, external, and face grinding with one chucking  info@seoseonews.com (Super Admin) Sat, 05 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4141/1/Three-axis-control-spotlight-of-grinder/Three-axis-control-spotlight-of-grinder.html The FGP-608LM grinder from Chevalier Machinery Inc. features linear motor drives, 3-axis closed-loop electronic control and structural stability to handle up to 2 G acceleration/deceleration.  info@seoseonews.com (Super Admin) Tue, 01 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4044/1/Cutter-and-grinder-coolant/Cutter-and-grinder-coolant.html Valenite's VNT-755 semi-synthetic coolant works well in general-purpose machining and with various ferrous and nonferrous materials. info@seoseonews.com (Super Admin) Wed, 19 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4022/1/Market-leading-precision-grinding-machines/Market-leading-precision-grinding-machines.html Jones and Shipman, the UK's foremost precision grinding machine manufacturer, will show four market-leading grinding machines at Mach 2008: three with 'Easy Control' CNC info@seoseonews.com (Super Admin) Mon, 17 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4005/1/Drake-Introduces-new-3-Axis-CNC-Vertical-Bore-Grinder/Drake-Introduces-new-3-Axis-CNC-Vertical-Bore-Grinder.html Drake Manufacturing’s new Model GS:I-V Vertical Bore Grinder was developed for high production bore grinding applications with families of parts - as well as small batch processing. info@seoseonews.com (Super Admin) Sat, 15 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/4004/1/New-Precision-Optics-Grinder-for-Spheres-and-Aspheres/New-Precision-Optics-Grinder-for-Spheres-and-Aspheres.html Accura Technics, LLC announces the successful launch of their MicroTol(TM) product line.  info@seoseonews.com (Super Admin) Sat, 15 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/3998/1/CNC-tool-grinder-simulation-exported-in-STEP-IGES/CNC-tool-grinder-simulation-exported-in-STEP-IGES.html Users of ANCA CNC tool and cutter grinders should benefit from the latest CIMulator3D grinding simulation software, which can now export a simulated tool in STEP Formats AP203 AP214 and IGES info@seoseonews.com (Super Admin) Fri, 14 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/3988/1/ANCA-Introduces-Micro-Tool-Grinder/ANCA-Introduces-Micro-Tool-Grinder.html Wixom, MI - ANCA's latest evolution of the successful RX7 CNC tool and cutter grinder, the RX7SP, is specifically designed for grinding cutting tools with diameters down to 0.5 mm.  info@seoseonews.com (Super Admin) Thu, 13 Mar 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/3949/1/Grinder-Gives-The-Performance-You-Rely-On/Grinder-Gives-The-Performance-You-Rely-On.html Williams and White, Burnaby BC , introduces the KGDM Vertical Spindle Surface Grinder. This grinder delivers the reliable performance required in the harshest of environments. info@seoseonews.com (Super Admin) Wed, 05 Mar 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3919/1/Space-Saving-Grinders/Space-Saving-Grinders.html Blohm Maschinebau GmbH Profimat MCs are universal profile grinders for creepfeed applications with 78.74-in. (2,000-mm) wide footprints.  info@seoseonews.com (Super Admin) Fri, 29 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3888/1/Universal-cylindrical-grinder-is-modular/Universal-cylindrical-grinder-is-modular.html A universal cylindrical grinding machine has a swivelling turret wheelhead that enables the external, internal and form grinding of workpieces in a single clamping info@seoseonews.com (Super Admin) Mon, 25 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3808/1/Universal-CNC-grinder-has-changeable-head/Universal-CNC-grinder-has-changeable-head.html A universal CNC cylindrical grinding machine has a rotatable wheel head that can be changed from straight to 30 deg angle approach, giving more flexibility in batch production info@seoseonews.com (Super Admin) Wed, 13 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3773/1/Niagara-Gear-expands-plant-for-gear-grinding-and-manufacturing/Niagara-Gear-expands-plant-for-gear-grinding-and-manufacturing.html Niagara Gear Corporation announced an 8,000 square foot expansion that features an upgraded gear cutting center, new manufacturing-engineering offices and an expanded gear grinding department. info@seoseonews.com (Super Admin) Thu, 07 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3769/1/Machine-grinds-tools-as-small-as-05mm-diameter/Machine-grinds-tools-as-small-as-05mm-diameter.html A CNC tool grinder is designed for grinding small cutting tools with diameters as low as 0.5mm having overcome problems of vibration, thermal growth, wheel wear and tool run-out info@seoseonews.com (Super Admin) Thu, 07 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3737/1/CNC-grinder-accommodates-long-shafts/Support-for-CNC-based-inspection-and-verification.html A 1,200 mm-length version of the company's LT1 CNC shaft grinder accommodates long parts such as camshafts for diesel and L6 automotive engines. info@seoseonews.com (Super Admin) Mon, 04 Feb 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3591/1/Precision-grinding-machinesTru-Tech-booth-B-6846/Precision-grinding-machinesTru-Tech-booth-B-6846.html The company's three-axis CNC precision grinding machine comes in models with cross-travels of 6", 7 1/2" and 9". Many components are made from stainless steel to prevent rust and corrosion. info@seoseonews.com (article admin) Fri, 25 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3549/1/Tapping-into-thread-grinding/Tapping-into-thread-grinding.html Greenfield Industries (Lyndonville, VT) reduced scrap rate 60% in special tap production by installing CNC thread grinders. Older mechanical grinders often produce scrap parts because of difficulties in achieving special-profile forms, and because machine positioning variations affect size.  info@seoseonews.com (article admin) Wed, 23 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3547/1/Eversharp-Tool-Inc-Installs-4th-CNC-Grinder/Eversharp-Tool-Inc-Installs-4th-CNC-Grinder.html Eversharp Tool, Inc., Tulsa, Oklahoma, has recently installed its fourth CNC grinder. info@seoseonews.com (article admin) Wed, 23 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3546/1/CNC-grinding-machine-for-PCD-PCBN-and-carbide-tools/CNC-grinding-machine-for-PCD-PCBN-and-carbide-tools.html Distributed by Precision International Corp., the Coborn RG8 is equipped with a reciprocating wheelhead and six CNC axes for machining applications such as rotary tools. To grind rotary cutters, helical cutters and multi-toothed saw blades, further axes can be added. info@seoseonews.com (article admin) Wed, 23 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3545/1/New-factory-for-tool-grinder-specialist-Walter/New-factory-for-tool-grinder-specialist-Walter.html Walter Maschinenbau GmbH of Germany has completed its move to new headquarters in T&uumlbingen, near Stuttgart. info@seoseonews.com (article admin) Wed, 23 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3520/1/CBN-grinder-uses-hydrostatic-leadscrew/CBN-grinder-uses-hydrostatic-leadscrew.html Grinder design has be precise to take advantage of CBN wheels. For example the 3L CNC from Landis Grinding Machines (Waynesboro, PA) has a two axis behind-the-wheel dressing system that has an in-feed resolution of 0.4 millionth in. (0.01 micron). It meets the dressing requirements for CBN that are about one micron or less. This is ten times finer than the requirements for conventional wheel dressing. info@seoseonews.com (article admin) Tue, 22 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3516/1/CNC-five-axis-tool-grinder---Eastec-2002---Deckel-Grinders-Inc/CNC-five-axis-tool-grinder---Eastec-2002---Deckel-Grinders-Inc.html The company will exhibit the S 20 Turbo CNC five-axis tool grinder, which features vertical work-holding for high accuracy grinding, 11 hp constant torque with integrated cooling system, glass scales, six-station wheel changer with up to 18 wheels for higher productivity, and wheel dressing and wheel measuring software.  info@seoseonews.com (article admin) Tue, 22 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3430/1/CNC-tool-and-cutter-grinder-is-consistent/CNC-tool-and-cutter-grinder-is-consistent.html To meet increasing demand for tooling regrinds from aerospace companies, a UK specialist tooling manufacturer has added on another CNC tool and cutter grinder for its consistency info@seoseonews.com (article admin) Thu, 17 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3371/1/CNC-grinder-improves-pump-case-quality/CNC-grinder-improves-pump-case-quality.html Jan-Oliver Roehrl speaks to 'Motion' magazine about the use of a Stratos vertical spindle CNC internal grinding machine at the Bosch plant in Jihlava, Czech Republic. In 2002 Bosch completely reassessed the machining processes for the manufacture of second-generation pump cases.  info@seoseonews.com (article admin) Thu, 10 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3339/1/Programmable-bearings-raise-grinding-accuracy/Programmable-bearings-raise-grinding-accuracy.html Hydrostatic bearings in surface grinding machines have programmable variable pressure to achieve flatness and straightness levels within 0.5 micron/m machine table stroke info@seoseonews.com (article admin) Tue, 08 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3325/1/High-helix-CNC--thread-grinder-is-precisefast/High-helix-CNC--thread-grinder-is-precisefast.html Incorporating latest CNC and servo technology to provide dynamic performance and smooth running characteristics a grinding machine produces accurate long lead/high helix components quickly info@seoseonews.com (article admin) Mon, 07 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3324/1/CNC-surface-grinder-exceeds-requirements/CNC-surface-grinder-exceeds-requirements.html CNC surface grinding machine exceeded all requirements for grinding a diverse range of cylindrical mould tooling from 292mm) to 711mm diameter to be used in timing belt system manufacture info@seoseonews.com (article admin) Mon, 07 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3323/1/High-speed-machine-grinds-in-one-set-up/High-speed-machine-grinds-in-one-set-up.html A high-speed grinding machine, delivered to a transmission manufacturer, combines high productivity associated with CBN and the flexibility derived from contour grinding info@seoseonews.com (article admin) Mon, 07 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3252/1/Rebuilder-manufactures-new-CNC-grinders-too/Rebuilder-manufactures-new-CNC-grinders-too.html In addition to its machine rebuilding and retrofitting services, IMTS also designs and manufactures a range of new grinding machines including CNC cylindrical grinders info@seoseonews.com (article admin) Thu, 03 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3248/1/CNC-grinder-completely-machines-taps-from-blanks/CNC-grinder-completely-machines-taps-from-blanks.html A novel CNC tap grinding machine allows highly efficient manufacturing of taps from a blank to a finished product and all grinding operations including threading are performed in one set-up info@seoseonews.com (article admin) Thu, 03 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3233/1/Adding-accuracy-to-long-tool-grinding-jobs/Adding-accuracy-to-long-tool-grinding-jobs.html To increase rigidity and accuracy when grinding long tools on a universal grinding machine, a P-axis that includes two travelling steadies and a CNC tailstock info@seoseonews.com (article admin) Wed, 02 Jan 2008 00:00:00 -0600 http://www.cnccncmachines.com/articles/3157/1/Grinding-Send-It-Out-Or-Keep-It-In-House/-Grinding-Send-It-Out-Or-Keep-It-In-House.html CNC tool grinding can improve the output quality of any screw machine operation. But there are a number of factors to consider when deciding whether to send tools out or grind them in-house: the volume and variety of tools; complexity of the tool versus programming and operator skills available; tool inventory required for production; and capital and labor costs.  info@seoseonews.com (article admin) Sat, 29 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3099/1/Taking-The-quotMagicquot-Out-Of-Grinding/Taking-The-quotMagicquot-Out-Of-Grinding.html Taking The "Magic" Out Of GrindingTaking The "Magic" Out Of GrindingIncreasingly, many of the metalworking skill sets that once resided with machinists are being relocated within the computer numerical control.  info@seoseonews.com (article admin) Wed, 26 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3098/1/Jig-Grinding-On-A-Machining-Center/Jig-Grinding-On-A-Machining-Center.html Roughing and finishing on a single machine, using a single setup, has appeal for most shops. The advantages in time savings and accuracy are obvious. info@seoseonews.com (article admin) Wed, 26 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3097/1/Blade-Grindings-Need-For-Speed/-Blade-Grindings-Need-For-Speed.html The properties that enable nickel-alloy blades to perform effectively in the hot section of turbine engines also make the blades challenging to machine. Larry Marchand, an aerospace accounts manager for United Grinding who has 22 years of industry experience in the manufacture of turbine engines, explains why this is the case. info@seoseonews.com (article admin) Wed, 26 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3056/1/Precision-grinding-machine-business-reviewed/Precision-grinding-machine-business-reviewed.html Facing an operating profit decline of 76%, during 2006 and a 25% decline in forward orders, Swedish precision grinding machine manufacturer is reviewing strategies and contemplating redundancies info@seoseonews.com (article admin) Mon, 24 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3044/1/Vertical-production-grinding-centre-hard-turns/Vertical-production-grinding-centre-hard-turns.html For the production machining of small chucked components of 2-60mm diameter, a vertical pick-up spindle grinding centre performs ID/OD/eccentric grinding and hard turning info@seoseonews.com (article admin) Sat, 22 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/3027/1/Toolmaker-invests-in-CNC-grinding-and-measurement/Toolmaker-invests-in-CNC-grinding-and-measurement.html Commitment to lights-out, unmanned production, a tooling company has invested in its sixth 5-axis CNC tool grinder and a tool measuring machine to stay ahead of competition info@seoseonews.com (article admin) Fri, 21 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2919/1/Innovations-in-deburring-and-grinding-machines-from-Sheetmetal-Machinery-Australia/Innovations-in-deburring-and-grinding-machines-from-Sheetmetal-Machinery-Australia.html Sheetmetal Machinery Australia  provides an innovative range of steel brushing machines developed by Lissmac.  info@seoseonews.com (article admin) Mon, 17 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2877/1/A-Grinder-Thats-More-Like-A-Milling-Machine/A-Grinder-Thats-More-Like-A-Milling-Machine.html The introduction of Bridgeport's FGC 2 flexible grinding center gives shops that machine aerospace blades and vanes an alternative to big, expensive grinding machines. info@seoseonews.com (article admin) Thu, 13 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2805/1/Cylindrical-Grinder-Offers-Simplified-Path-To-CNC/Cylindrical-Grinder-Offers-Simplified-Path-To-CNC.html Making the step up from manual or hydraulic grinders to CNC can be a scary proposition. How do you operate it? How do you program it? How do you make it productive? info@seoseonews.com (article admin) Mon, 10 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2804/1/Getting-A-Grinding-Bonus/Getting-A-Grinding-Bonus.html In today's world, many new products fail to live up to buyers' expectations. One new product not only met the user's expectations, but it provided a number of unlooked-for benefits as well. info@seoseonews.com (article admin) Mon, 10 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2800/1/Internal-Grinding-Spindle-Listens-To-See/Internal-Grinding-Spindle-Listens-To-See.html Setting up an internal grind for complex bores or threads is a time consuming activity. Shops all across metalworking are looking for ways to reduce the non-metal cutting time. info@seoseonews.com (article admin) Mon, 10 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2799/1/CNC-grinding-slashes-shops-delivery-time/CNC-grinding-slashes-shops-delivery-time.html By switching to CNC grinders, Moeller Manufacturing Co. of Plymouth, Mich., now produces and delivers virtually any punch from solid within three days of a customer order.  info@seoseonews.com (article admin) Mon, 10 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2798/1/CNC-Grinder-Helps-Start-A-Business/-CNC-Grinder-Helps-Start-A-Business.html With the economy beginning to head south, many manufacturers were searching for ways to cut costs during the late 1990s. To many, this would seem to be an inopportune time to start a niche grinding business.  info@seoseonews.com (article admin) Mon, 10 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2759/1/Flexible-machines-grind-turbine-components/Flexible-machines-grind-turbine-components.html Turbine components manufacturing operation has added four flexible, travelling column type grinding systems after an in-depth period of trials and tests info@seoseonews.com (article admin) Fri, 07 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2749/1/Grinding-Machine-targets-automobile-industry/Grinding-Machine-targets-automobile-industry.html  Vertical Generating Grinding Machine, Model S 250 G features cast iron machine bed and light metal subassembly, consisting of spindle with electric drive, absolute position encoder, and tailstock. Spindle offers output of 48 kW and max speed of 20,000 rpm. Siemens CNC control system and magnetic encoder ensure synchronization between tool and workpiece.  info@seoseonews.com (article admin) Thu, 06 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2719/1/New-Vertical-Grinding-Machining-Center/New-Vertical-Grinding-Machining-Center.html INDEX Corp. (www.index-usa.com) is introducing the V160 vertical grinding and machining center that incorporates ID/OD grinding, autoloading and rough machining (hard turning) with automatic in-machine wheel dressing and in-process gauging. info@seoseonews.com (article admin) Wed, 05 Dec 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2625/1/CNC-grinding-slashes-shops-delivery-time/CNC-grinding-slashes-shops-delivery-time.html By switching to CNC grinders, Moeller Manufacturing Co. of Plymouth, Mich., now produces and delivers virtually any punch from solid within three days of a customer order. The shop, which manufactures punches, die buttons, retainers, and die details for the tool-and-die and metal-stamping industries, runs three Anca PGX CNC punch-grinding machines that each produce over 15,000 parts annually. info@seoseonews.com (Super Admin) Thu, 29 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2595/1/Makino-Introduces-G5-Grinder/Makino-Introduces-G5-Grinder.html Makino (www.makino.com) has just introduced the G5 Grinder horizontal machining center, capable of grinding, drilling, boring and milling, all on the same machine. info@seoseonews.com (article admin) Wed, 28 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2524/1/CNC-tool-and-cutter-grinder-reduces-turnround-time/CNC-tool-and-cutter-grinder-reduces-turnround-time.html To grind brazed and solid carbide fir tree cutters, a toolmaker invested in a CNC tool and cutter grinder to reduce product turn round time drastically info@seoseonews.com (article admin) Fri, 23 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2523/1/Modern-CNC-tool-grinders-ensure-prosperity/Modern-CNC-tool-grinders-ensure-prosperity.html To keep pace with our customer demands a toolmaker has acquired modern CNC tool grinders to grind increasingly complex tooling to stay in business and thrive info@seoseonews.com (article admin) Fri, 23 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2513/1/CNC-Grinding-Machines/CNC-Grinding-Machines.html The company has introduced its new EP line of standard NC/CNC grinding machines. Included in the series are the EJ 10, EJ 11, Quickpoint 1000 and Tapomat 1000 models. These new machines were designed specifically to meet the needs of small- and medium-sized job shops. info@seoseonews.com (article admin) Thu, 22 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2512/1/Cylindrical-Grinder-Offers-Simplified-Path-To-CNC/Cylindrical-Grinder-Offers-Simplified-Path-To-CNC.html Making the step up from manual or hydraulic grinders to CNC can be a scary proposition. How do you operate it? How do you program it? How do you make it productive? info@seoseonews.com (article admin) Thu, 22 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2511/1/Getting-A-Grinding-Bonus/Getting-A-Grinding-Bonus.html In today's world, many new products fail to live up to buyers' expectations. One new product not only met the user's expectations, but it provided a number of unlooked-for benefits as well. info@seoseonews.com (article admin) Thu, 22 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2510/1/-CNC-Grinder-Helps-Start-A-Business/-CNC-Grinder-Helps-Start-A-Business.html With the economy beginning to head south, many manufacturers were searching for ways to cut costs during the late 1990s. To many, this would seem to be an inopportune time to start a niche grinding business.  info@seoseonews.com (article admin) Thu, 22 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2507/1/Tool-and-Cutter-GRINDING/Tool-and-Cutter-GRINDING.html Keeping tools and cutters sharp is one of those inescapable overhead costs all manufacturers have to accept. info@seoseonews.com (article admin) Thu, 22 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2501/1/CNC-Cylindrical-Grinder-has-infinitely-variable-turret/CNC-Cylindrical-Grinder-has-infinitely-variable-turret.html Infinity(TM) features turret with 2 spindle pod mounting positions. Pods, which can be optimized for use of different size grinding wheels, may be optionally fitted with left- or right-hand wheels adapted to specific applications.  info@seoseonews.com (article admin) Thu, 22 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2499/1/CNC-Bore-Grinder-has-3-axis-vertical-design/CNC-Bore-Grinder-has-3-axis-vertical-design.html Developed for high production bore grinding applications as well as small batch processing, GS:I-V has 48 x 72 in. footprint that simplifies manual or automatic loading. Machine features cast polymer base, balanced spindles from 30,000-90,000 rpm, and rotary diamond contour dresser.  info@seoseonews.com (article admin) Wed, 21 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2468/1/CBN-form-grinding-wheels-offered/CBN-form-grinding-wheels-offered.html Electroplated CBN wheels offer substantial benefits - particularly when grinding exotic alloy steels; the tough crystals stay sharp longer as they tend to be self sharpening under cutting stress info@seoseonews.com (article admin) Tue, 20 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2410/1/Oil-mist-extraction-solves-grinding-problem/Oil-mist-extraction-solves-grinding-problem.html Found to be ideal for a heavy duty grinding machine an oil mist extraction unit uses centrifugal impaction to collect the oil mist and safely returning oil to the machine's reservoir info@seoseonews.com (article admin) Fri, 16 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2376/1/CNC-grinding-slashes-shops-delivery-time/CNC-grinding-slashes-shops-delivery-time.html By switching to CNC grinders, Moeller Manufacturing Co. of Plymouth, Mich., now produces and delivers virtually any punch from solid within three days of a customer order.  info@seoseonews.com (article admin) Wed, 14 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2287/1/Tyrolit-Launches-Two-New-Ranges-Of-CBN-Grinding-Wheels/Tyrolit-Launches-Two-New-Ranges-Of-CBN-Grinding-Wheels.html Two new ranges of external cylindrical grinding wheels, one using cubic boron nitride (CBN) grains in an electroplated nickel matrix and the other based on CBN grains in a vitrified bond, have been introduced by Tyrolit. Called POLARIS and GENIS respectively, they are intended for large volume production of components from difficult materials such as hardened steel and tough exotic alloys. info@seoseonews.com (article admin) Thu, 08 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2285/1/CNC-pin-chasing-crankshaft-grinder/CNC-pin-chasing-crankshaft-grinder.html The Jucrank 6000 is an extension of the Erwin Junker Machinery's Jucrank line. With a clamping length as long as 1,500 mm, a grinding length as long as 1,400 mm and rotating diameters as high as 280 mm, the grinder is useful for grinding truck and heavy-duty cranks. info@seoseonews.com (article admin) Thu, 08 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2283/1/CNC-tool-and-cutter-grinder-grows-company/CNC-tool-and-cutter-grinder-grows-company.html CNC tool and cutter grinder converts tool regrinding and modification company into a significant manufacturer of special and standard tooling info@seoseonews.com (article admin) Thu, 08 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2271/1/Creep-feed-and-flat-surface-grinding/Creep-feed-and-flat-surface-grinding.html The Blohm Precimat 306 CNC, a surface and profile grinding system from United Grinding Technologies (UGT), is useful for single-piece and batch production. Because the machine can address small lots, it can be useful in tool and die and medical applications. The grinder is also suited for higher-volume runs. info@seoseonews.com (article admin) Wed, 07 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2270/1/TIGHT-TOLERANCE-GRINDING/TIGHT-TOLERANCE-GRINDING.html Grinding is coming on strong as the preferred, and sometimes only way to meet today's standards for accuracy. The price of CBN is dropping as it becomes more a commodity than a specialty item. info@seoseonews.com (article admin) Wed, 07 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2254/1/Control-systems-for-CNC-grinding---computer-numerical-control/Control-systems-for-CNC-grinding---computer-numerical-control.html Perhaps the most exciting developments in CNC grinding are in the controls themselves. Here, one builder explains just how far this technology has come. info@seoseonews.com (article admin) Tue, 06 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2253/1/Filtration-System-suits-CNC-grinding-applications/Filtration-System-suits-CNC-grinding-applications.html Gravity Roll Media Filter, Model GRMC-300 offers coolant flow rate capacity of 30 gpm. Utilizing deep filter cake to provide filtration of grinding swarf, system has positive seal to eliminate fines migration around edges of media. System features 17 in. coolant inlet height and takes 38 in. wide media. It includes integral tank, standard control module, and removable top cover for maintenance. info@seoseonews.com (article admin) Tue, 06 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2220/1/Grinding-and-hobbing-medium-pitch-gears-and-worms/Grinding-and-hobbing-medium-pitch-gears-and-worms.html Using high speed direct drive spindles for the work head and work spindle, the P 90 G horizontal grinding and hobbing machine from Gleason Corporation provides a universal base for multiple grinding processes.  info@seoseonews.com (article admin) Mon, 05 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2216/1/CNC-Grinder-handles-various-part-features-in-same-machine/CNC-Grinder-handles-various-part-features-in-same-machine.html Landis Evolution CNC Grinder enables precision plunge and traverse peel grinding of multiple part features in same cycle. High-speed spindle permits grinding wheel speeds to 250 m/sec with part rotation to 7,500 rpm. Grinder incorporates granite base, workhead spindle-mounted rotary diamond dresser, and 5 mm wide CBN wheel to contour complex part shapes.  info@seoseonews.com (article admin) Sun, 04 Nov 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/2176/1/Walter-Helitronic-Power-CNC-tool-grinder-gets-grinding-wheel-changer/Walter-Helitronic-Power-CNC-tool-grinder-gets-grinding-wheel-changer.html This extends the machine’s capabilities for the automated, non-stop processing of complex tool forms (different wheels for multiple operations) or large batch work (sister wheels) in both production and regrinding applications. info@seoseonews.com (article admin) Thu, 01 Nov 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/2173/1/CNC-tool-grinders-get-friendly/CNC-tool-grinders-get-friendly.html The overworked term "user-friendly" really means something when it comes to controlling the motions of five and six-axis CNC tool and cutter grinders.  info@seoseonews.com (article admin) Thu, 01 Nov 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/2165/1/Silver-Crescent-CNC-Grinder-Repair/Silver-Crescent-CNC-Grinder-Repair.html Silver Crescent CNC Grinder Repair is a repair and consulting service for CNC grinders and machine tool cutters, specializing in Huffman and Strausak machines. In our short history, we've grown to serve a list of international and domestic clients. info@seoseonews.com (article admin) Thu, 01 Nov 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/2096/1/Turning-grinding-and--machining-goes-wireless/Turning-grinding-and.html FSG Tool and Die has introduced a wireless communication system for its turning, CNC grinding and high-speed CNC machining sections following a relocation info@seoseonews.com (article admin) Fri, 19 Oct 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/2094/1/Turning-grinding-and--machining-goes-wireless.html FSG Tool and Die has introduced a wireless communication system for its turning, CNC grinding and high-speed CNC machining sections following a relocation info@seoseonews.com (article admin) Fri, 19 Oct 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/2051/1/Jig-Grinding-EDM-or-High-Speed-Milling/Jig-Grinding-EDM-or-High-Speed-Milling.html As the challenges continue to arise—such as wall thickness of the finished molded product becoming thinner and thinner—jig grinding is delivering the required higher accuracy and repeatability to molds. Mold closures must be perfect with no mismatches, and manufacturers no longer tolerate inferior quality associated with their products. info@seoseonews.com (article admin) Sat, 13 Oct 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/2039/1/CNC-Grinders-Decrease-Manpower-Improve-Delivery-Times/CNC-Grinders-Decrease-Manpower-Improve-Delivery-Times.html Prestige Mold, Inc.a designer and manufacturer specializing in multi-cavity, multi-component, hot runner, interchangeable molds primarily for the medical and industrial markets—prides itself on being an industry leader among plastic injection mold manufacturers by providing the best service, best quality, and superior mold design and manufacture.  info@seoseonews.com (article admin) Fri, 12 Oct 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1991/1/CNC-grinding-slashes-shops-delivery-time/CNC-grinding-slashes-shops-delivery-time.html By switching to CNC grinders, Moeller Manufacturing Co. of Plymouth, Mich., now produces and delivers virtually any punch from solid within three days of a customer order. info@seoseonews.com (article admin) Thu, 04 Oct 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1966/1/Hybrid-Grinders-For-High-End-Parts/Hybrid-Grinders-For-High-End-Parts.html Maintaining tight tolerances is essential in the production of large, expensive parts that serve critical applications. info@seoseonews.com (article admin) Sat, 29 Sep 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1965/1/Machine-Boosts-Productivity-Of-Aerospace-Component-Manufacturer/Machine-Boosts-Productivity-Of-Aerospace-Component-Manufacturer.html The High Temperature Components Section of aerospace manufacturer Centrax of Newton Abbot, Devon, England, specializes in the machining of turbine nozzle guide vanes and rotor blades for air- and land-based gas turbine engines.  info@seoseonews.com (article admin) Sat, 29 Sep 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1925/1/Grinder-cuts-cycle-times-to-the-bone/Grinder-cuts-cycle-times-to-the-bone.html When demand for its products increased worldwide, Corin Group, a British orthopedic implant manufacturer, invested in a special grinding machine for grinding its bone rasps and for femoral components that make up the company’s knee systems.  info@seoseonews.com (article admin) Mon, 24 Sep 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1918/1/Fully-automatic-CNC-grinding-machine---Modern-Equipment-Review/Fully-automatic-CNC-grinding-machine---Modern-Equipment-Review.html The company is launching in the American market a new, robot equipped, fully automatic, CNC grinding machine--the WAM 370R--for peripheral grinding of cutting inserts in single and multi-workpiece clamping. info@seoseonews.com (article admin) Fri, 21 Sep 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1883/1/Jig-Grinding-On-A-Machining-Center/Jig-Grinding-On-A-Machining-Center.html Roughing and finishing on a single machine, using a single setup, has appeal for most shops. The advantages in time savings and accuracy are obvious. Eliminating the transport of workpieces between machines, as well as the setup for those secondary operations, is a boon for throughput. info@seoseonews.com (article admin) Thu, 13 Sep 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1825/1/Modules-simplify-CNC-grinding-machine-choice/Modules-simplify-CNC-grinding-machine-choice.html Modular CNC cylindrical grinding machine series covers almost every application and offers a multitude of processing options, which makes machine selection simpler info@seoseonews.com (article admin) Wed, 05 Sep 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1794/1/CNC-tool-and-cutter-grinderAnca-booth-B-7432/CNC-tool-and-cutter-grinderAnca-booth-B-7432.html Although primarily for tool sharpening, the RX7 CNC tool and cutter grinder is also capable of new tool production. info@seoseonews.com (article admin) Thu, 30 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1780/1/Cam-shaft-grinder-machines-free-form-surfaces/Cam-shaft-grinder-machines-free-form-surfaces.html A patented swiveling spindle and a reliable programming system enables a CNC cam shaft grinder to machine polygonal, elliptical and free form surface profiles simply and efficiently info@seoseonews.com (article admin) Wed, 29 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1774/1/CNC-grinder-makessharpens-wood-working-tooling/CNC-grinder-makessharpens-wood-working-tooling.html CNC double-spindle, tool and cutter grinder has been introduced to manufacture and resharpen a variety of wood working tools from round shank cutters to complex profile routers or blades info@seoseonews.com (article admin) Sat, 25 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1725/1/Surface-grinders-have-more-CNC-flexibility/Surface-grinders-have-more-CNC-flexibility.html More flexibility in programming with variable graphics simulation for grinding and wheel dressing feature the latest Chevalier CNC surface grinding machines info@seoseonews.com (article admin) Tue, 21 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1719/1/Single-CNC-Controls-Large-Creep-Feed-Grinder/Single-CNC-Controls-Large-Creep-Feed-Grinder.html Less than three years after opening doors in Orangeburg, SC, aba z&b USA Inc. is already making its mark on the US surface and profilegrinder market. info@seoseonews.com (article admin) Mon, 20 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1718/1/How-to-get-started-in-CNC-grinding/How-to-get-started-in-CNC-grinding.html Rob Murnyack turned his professional life upside down in this quest to get into CNC machining. Rob had worked for his father for more than 20 years and was eager to get into CNC grinding when he launched his own business, Absolute Grinding (Mentor, OH). info@seoseonews.com (article admin) Mon, 20 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1717/1/CNC-Grinding-System-targets-creepfeed-applications/CNC-Grinding-System-targets-creepfeed-applications.html  Suited for cellular or lean manufacturing, Profimat MC traveling column machine provides multi-axis grinding and is available with integrated automatic tool changer that can switch wheels in 8 sec.  info@seoseonews.com (article admin) Mon, 20 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1657/1/Types-of-grinders/Types-of-grinders.html Belt grinder, which is usually used as a machining method to process metals and other materials, with the aid of coated abrasives. Sanding is the machining of wood; grinding is the common name for machining metals. Belt grinding is a versatile process suitable for all kind of applications like finishing, deburring, and stock removal info@seoseonews.com (article admin) Thu, 16 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1656/1/CNC-tool-and-cutter-grinder/CNC-tool-and-cutter-grinder.html Today's tool and grinder is typically a CNC machine tool, usually 4, 5, or 6 axes, which produces endmills, drills, etc. which are widely used in the metal cutting industry. info@seoseonews.com (article admin) Thu, 16 Aug 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1591/1/Watson-Grinding--Manufacturing-Turns-to-Romi-for-Turning-Valve-Components/Watson-Grinding--Manufacturing-Turns-to-Romi-for-Turning-Valve-Components.html The open market system and fierce competition in the market have made consumers the king. With increase in service providers and options available in the market, price has become a sensitive issue. info@seoseonews.com (article admin) Mon, 30 Jul 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1579/1/Surface-Grinders/Surface-Grinders.html Surface grinders are machine tools used to provide precision regarding the level, size or finish of the surfaces. The longitudinal feed is usually powered by hydraulics or cross feed, and any mixture of hand, electrical or hydraulic operation styles may be used depending on the ultimate usage of the machine. info@seoseonews.com (article admin) Wed, 18 Jul 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1480/1/Production-Demands-00008quot-Normal-Grinding-Tolerance/Production-Demands-00008quot-Normal-Grinding-Tolerance.html With only 65 employees, Trotter Machine Inc. (Rockford, IL) is among the largest U.S. producers of hydraulic valve spools to off-highway equipment OEMs. info@seoseonews.com (article admin) Tue, 10 Jul 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1470/1/A-Simpler-Way-To-Automatically-Load-Grinding-Machines/A-Simpler-Way-To-Automatically-Load-Grinding-Machines.html Many job shops are considering automated machine loading and unloading systems in order to make more efficient use of their labor. To be effective in environments where short job runs and frequent change-overs are the norm, such automated systems must be flexible and intuitive to set up. info@seoseonews.com (article admin) Tue, 10 Jul 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1469/1/Cylindrical-Grinder-Offers-Simplified-Path-To-CNC/Cylindrical-Grinder-Offers-Simplified-Path-To-CNC.html Making the step up from manual or hydraulic grinders to CNC can be a scary proposition. How do you operate it? How do you program it? How do you make it productive? info@seoseonews.com (article admin) Tue, 10 Jul 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1450/1/Grinding-Shop-Steps-Up-To-CNC-Machining/Grinding-Shop-Steps-Up-To-CNC-Machining.html Rob Murnyack had been turning his professional life upside down in a quest to use CNC machining at his shop. He'd been working for his father for more than 20 years in what had become a successful grinding operation. However, Mr. Murnyack wanted to take the company to the next level—using CNC machining. info@seoseonews.com (article admin) Mon, 09 Jul 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1427/1/One-machine-software-for-grinding-taps/One-machine-software-for-grinding-taps.html ANCA has launched “iTap”, is a one set-up and one machine software suite for the complete grinding of taps. info@seoseonews.com (article admin) Fri, 06 Jul 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1369/1/CNC-Grinding-Cell-Cuts-Leadtimes-For-Progressive-Die-Maker/CNC-Grinding-Cell-Cuts-Leadtimes-For-Progressive-Die-Maker.html The grinding department at L. H. Carbide (Fort Wayne, Indiana) is no stranger to CNC grinding. But CNC equipment has tended to be under-used here. The shop machines carbide components to accuracies of ±0.0001 inch that are used in the company's complex, progressive stamping dies. info@seoseonews.com (article admin) Mon, 02 Jul 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1362/1/Grind-woodworking-tools-with-WGX/Grind-woodworking-tools-with-WGX.html AUSTRALIAN CNC grinder manufacturer ANCA has released a new machine designed specifically to grind woodworking tools. info@seoseonews.com (article admin) Mon, 02 Jul 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1328/1/Machining-centres-and-grinding-machines/Machining-centres-and-grinding-machines.html OKUMA Australia is owned by Okuma Corporation of Japan, one of the largest machine tool manufactures in the world. info@seoseonews.com (article admin) Fri, 29 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1322/1/CNC-gear-profile-grinding-machine/CNC-gear-profile-grinding-machine.html THE new Hofler CNC gear profile-form grinding machine, recently commissioned by Melbourne gear manufacturer Ronson Gears, is a state-of-the-art facility that significantly advances the capability of Australian gear manufacturing. info@seoseonews.com (article admin) Fri, 29 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1309/1/Increase-gear-grinding-capacity/Increase-gear-grinding-capacity.html RONSON Gears recently purchased the company's second Höfler Helix 700 gear grinding machine at the EMO Exhibition in Germany. info@seoseonews.com (article admin) Thu, 28 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1308/1/Gear-grinding-capacity-doubled/Gear-grinding-capacity-doubled.html RONSON Gears continues their policy of providing Australian industries with gear products that use the latest in gear manufacturing technology. info@seoseonews.com (article admin) Thu, 28 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1221/1/Punch-Grinder-Boosts-Competitive-Edge/Punch-Grinder-Boosts-Competitive-Edge.html One punch die manufacturer stands out by supplying punches for almost 30 fabricating equipment manufacturers. A new grinder further pushes the company into the global market by increasing productivity and reducing downtime. info@seoseonews.com (article admin) Thu, 21 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1208/1/CNC-end-face-and-OD-peel-grinder/CNC-end-face-and-OD-peel-grinder.html Developed by Ulmer Werkzeug Schleiftechnik for machining tungsten carbide and HSS tool blank tips, the CNC SF 40 Reinecker is now available from Efficient Mfg. Technologies. info@seoseonews.com (article admin) Wed, 20 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1207/1/CNC-vertical-grinder-reduces-leadtime/CNC-vertical-grinder-reduces-leadtime.html Now available from Mori Seiki is the Taiyo Koki IGV-3NT CNC vertical grinding machine. As a result of vertical grinding, users can experience the benefits of multi-processing and achieve a lean manufacturing environment, according to the company. info@seoseonews.com (article admin) Wed, 20 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1195/1/Taking-The-quotMagicquot-Out-Of-Grinding/Taking-The-quotMagicquot-Out-Of-Grinding.html Increasingly, many of the metalworking skill sets that once resided with machinists are being relocated within the computer numerical control. Shops that have seen the attrition of the skilled workforce and endured the difficulty in finding equivalent replacements are looking to automation to keep the work flowing through the shop. info@seoseonews.com (article admin) Tue, 19 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1187/1/One-Stop-Milling-Drilling-Turning-And-Grinding/One-Stop-Milling-Drilling-Turning-And-Grinding.html Conventional metalworking practice suggests that processing hardened, precision, parts-of-rotation should be done in proper order. Blanks are first cut to length. Next they are loaded into a turning center and turned down to a point where "grinding stock" remains. Depending on the part, there may be an intermediary stop at a machining center info@seoseonews.com (article admin) Mon, 18 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1169/1/-Laser-Measurement-Enables-Closed-Loop-Centerless-Grinding/-Laser-Measurement-Enables-Closed-Loop-Centerless-Grinding.html Routine part measurement adds no value to workpieces. It does, however, offer a means to track machining accuracy so that equipment can be adjusted to ensure that parts are produced to tolerance. If a process could adjust itself on the fly, then it would be unnecessary to interrupt production to make such adjustments manually. info@seoseonews.com (article admin) Fri, 15 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1123/1/CNC-machines-for-sale-include-Elb-grinder/CNC-machines-for-sale-include-Elb-grinder.html Latest used machine tools offered for sale include an Elb CNC rotary table surface grinder, a 5-axis Dixi jig borer, a horizontal CNC miller and a bevel gear grinderRecently acquired CNC and non-CNC machine tools offered for sale by Gribben Davies Machine Tools UK include an Elb CNC Model 10-10 Rotary Table Surface Grinder. info@seoseonews.com (article admin) Sat, 09 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1118/1/Tool-grinder-tackles-micro-tools/Tool-grinder-tackles-micro-tools.html The new Walter six-axis Helitronic Micro tool grinder has been specifically designed from the ground up to meet increasing production demands in the medical and electronics sectors for the production of micro tools of 0.1 mm to 12.7 mm diameter and the regrinding of tools from 2 mm to 12.7 mm diameter. info@seoseonews.com (article admin) Fri, 08 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1104/1/Grinding-Send-It-Out-Or-Keep-It-In-House/Grinding-Send-It-Out-Or-Keep-It-In-House.html CNC tool grinding can improve the output quality of any screw machine operation. But there are a number of factors to consider when deciding whether to send tools out or grind them in-house: the volume and variety of tools; complexity of the tool versus programming and operator skills available; tool inventory required for production; and capital and labor costs.  info@seoseonews.com (article admin) Thu, 07 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1087/1/Modular-grinders-chase-crankshaft-pins/Modular-grinders-chase-crankshaft-pins.html Modular cylindrical grinding machines, which can be built for crankshafts up to 6m long, use pin-chasing process to machine to high accuracy and best surface finishThe crankshaft grinding specialists, Naxos-Union, have regained lost ground and are - with their PM 3xx - once more the market leader in truck engine crankshafts info@seoseonews.com (article admin) Tue, 05 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1077/1/Super-abrasive-peel-grinding-bests-Inconel-turning/Super-abrasive-peel-grinding-bests-Inconel-turning.html Holroyd has employed its super abrasive machining technology to reduce the cycle time for producing turbo charger stators from 5½ minutes to just 46 seconds. info@seoseonews.com (article admin) Mon, 04 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1076/1/ANCAs-TX7-Xchanger-can-grind-mill-and-drill/ANCAs-TX7-Xchanger-can-grind-mill-and-drill.html The TX7+Xchanger unveiled this month at Chicago's IMTS exhibition incorporates an ANCA TX7+ universal grinder with a wheel pack exchanging system and magazine.  info@seoseonews.com (article admin) Mon, 04 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1057/1/-Laser-Measurement-Enables-Closed-Loop-Centerless-Grinding/-Laser-Measurement-Enables-Closed-Loop-Centerless-Grinding.html Routine part measurement adds no value to workpieces. It does, however, offer a means to track machining accuracy so that equipment can be adjusted to ensure that parts are produced to tolerance. info@seoseonews.com (article admin) Fri, 01 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1055/1/CNC-grinding-machine-with-linear-motors/CNC-grinding-machine-with-linear-motors.html WALTER-Speedmax claims productivity increases as high as 50 per cent with its newly developed Helitronic Vision CNC grinding machine for rotationally symmetrical carbide or HSS tools ranging from 3 - 32mm in diameter - and all with increased levels of accuracy and improved surface qualities. info@seoseonews.com (article admin) Fri, 01 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1054/1/Chevalier-CNC-surface-grinder-range-expanded/Chevalier-CNC-surface-grinder-range-expanded.html The Chevalier range of CNC surface grinding machines has been expanded and brings new levels of programming flexibility with variable graphics simulation for grinding and wheel dressing where the speed of review sequences can be varied by the operator.  info@seoseonews.com (article admin) Fri, 01 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1052/1/Raw-grinding/Raw-grinding.html Don't believe the rumors that hard turning and other advanced machining processes are crowding out grinding. Technological advancements have not only improved grinding's accuracy and precision but have also increased its metal-removal rates tremendously.  info@seoseonews.com (article admin) Fri, 01 Jun 2007 00:00:00 -0500 http://www.cnccncmachines.com/articles/1051/1/Superior-Tool-Service-Wichita-Installs-3rd-ANCA-CNC-Grinder/Superior-Tool-Service-Wichita-Installs-3rd-ANCA-CNC-Grinder.html Superior Tool Service, Inc., Wichita, Kansas, has recently installed its third ANCA CNC grinding machine. info@seoseonews.com (article admin) Fri, 01 Jun 2007 00:00:00 -0500