http://www.cnccncmachines.com en-us http://www.cnccncmachines.com N/A info@seoseonews.com Tue, 18 Nov 2008 09:10:53 -0600 20 http://www.cnccncmachines.com/articles/4264/1/Controller-and-Stepper-Motor-offer-singlemultiaxis-handling/Controller-and-Stepper-Motor-offer-singlemultiaxis-handling.html EMMS-ST stepper motor offers holding torque from 0.5-9.3 Nm, with external gearbox options of 3:1 and 5:1.  info@seoseonews.com (Super Admin) Tue, 15 Apr 2008 00:00:00 -0500 http://www.cnccncmachines.com/articles/2227/1/Five-Phase-Stepper-Driver-powers-high-torque-step-motors/Five-Phase-Stepper-Driver-powers-high-torque-step-motors.html IMS51 series ac bipolar drivers are CE compliant to meet safety protocols when powering ultra high torque step motors. Output current can be selected as 1.4 A/phase or 2.8 A/phase, depending on requirement. With basic step division of .72[degrees] full step at 500 steps/revolution and .36[degrees] half step at 1,000 steps/revolution, driver suits NEMA size 17, 23 or 34 5-phase step motors. Requiring no power supply, units operate from 120 or 220 Vac. info@seoseonews.com (article admin) Mon, 05 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/2226/1/IP67-Rated-Module-controls-stepper-motors/IP67-Rated-Module-controls-stepper-motors.html Mounted directly on machine frame next to motor, X67 Stepper Motor Modules offer 2 control possibilities and integrated motor detection. Module X67SM4320 controls up to 4 stepper motors, with rated voltage of 18-30 Vdc at motor current up to 1 A, while module X67SM2436 controls up to 2 stepper motors, with rated voltage of 18-48 Vdc at motor current up to 3 A. info@seoseonews.com (article admin) Mon, 05 Nov 2007 00:00:00 -0600 http://www.cnccncmachines.com/articles/496/1/CNC-automatics-expand-horizons-for-subcontractor/CNC-automatics-expand-horizons-for-subcontractor.html Having invested in CNC automatics, a manufacturer of machined complex plastics parts has found it can take smaller batches and diversify into other areas. info@seoseonews.com (article admin) Fri, 14 Apr 2006 00:00:00 -0500 http://www.cnccncmachines.com/articles/41/1/Stepper-controller-is-made-for-Allen-Bradley-PLCs/Stepper-controller-is-made-for-Allen-Bradley-PLCs.html Advanced Micro Controls (AMCI), a Connecticut based industrial controls company, has developed a novel stepper motor control module for Allen-Bradley's Point I/O. Boasting seamless integration into Allen-Bradley's distributed I/O network, the 3401 module is ideal for applications where low-cost of ownership are key for successful control system design and operation.  info@seoseonews.com (article admin) Wed, 28 Dec 2005 00:00:00 -0600