CNC CNC Machines information types of machines, manufacturers, lathe machines and cnc marketplace - http://www.cnccncmachines.com
Haas lathes at EMO with new generation
http://www.cnccncmachines.com/articles/7772/1/Haas-lathes-at-EMO-with-new-generation/Haas-lathes-at-EMO-with-new-generation.html
By Super Admin
Published on 07/9/2011
 
Apart from the DS-30Y CNC lathe with dual spindle, Haas Automation will be two lathes at EMO show never before been seen at an exhibition in Europe: the ST-10 and ST-40. Visitors will also DT-1-boortapmachine and some examples of the latest generation of vertical machining can see in action.
Haas lathes at EMO with new generation
Apart from the DS-30Y CNC lathe with dual spindle, Haas Automation will be two lathes at EMO show never before been seen at an exhibition in Europe: the ST-10 and ST-40. Visitors will also DT-1-boortapmachine and some examples of the latest generation of vertical machining can see in action.

The turning of the DS-30 series with Y-axis to run dual core possible and offer a Y-axis, a C axis and driven tools. This combination provides powerful all-in-one 'machining solutions. The spindles are located opposite each other and support fully synchronized rotating workpieces and exports while the machine is to shorten the cycle times.

The ST-10 and ST-40 are the newest additions to its range of fully redesigned Haas lathes. The ST-40, which is available from the EEO , offers a maximum capacity of 648 x 1118 mm, swing diameter 1016 mm, a drive with a maximum power of 30 kW and a gearbox with two speeds that a maximum speed of 2400 rpm / min supplies. His little brother, the ST-10, is already on sale. The ST-10 is a compact CNC lathe with a maximum capacity of 356 x 356 mm and a diameter of 413 mm sweep. The machine has a drive with a maximum power of 11.2 kW, which typically has a maximum speed of 6000 rev / min provides.

The DT-1 is a fast drilling and tapping machine, all CNC milling capabilities. The machine has a working range of 508 mm x 406 mm x 394 mm and a T-slot table 660 mm x 381 mm. The SK-30 delivers a maximum spindle speed of 15,000 rev / min and tapsnelheden to 5,000 rev / min. The DT-1 standard provides a fast tool changer with 20 positions and rapids of 61 m / min in all axes. Thanks to high acceleration and short cycle times deceleratiesnelheden be realized. The non-productive time is shorter.

The new Haas VF-SS models offer different speed innovations that increase productivity. Think of the better drive, better chip flow and improved coolant management. The new VF-machines are a bold and contemporary manner redesigned. Moreover, the panels are close to each other and even better handling and ergonomics are improved for easier and more efficient operation.

http://www.metaalnieuws.nl/nieuws/6120/haas-met-nieuwe-generatie-draaibanken-naar-emo.html